E-Genius Appliance Repair EPA Universal CertifiedEPA Certified $2M Insured Registered Charlotte, NC BusinessRegistered in Charlotte, NC

GE Profile
Stove / Range Repair

Experienced technicians serving your neighborhood.

GE Profile Stove Repair in 3 Steps

Need GE Profile stove repair in Charlotte, NC? Tell us about burners that will not ignite or uneven heating and choose a service visit.

  1. Describe Your Stove Issue

    Report burners that will not ignite, uneven heating, or an error message if shown. Include the GE Profile stove or range model number.

  2. Schedule Stove Service

    Choose an available time for your GE Profile stove repair appointment in Charlotte.

  3. Review Repair Options

    Our technician checks burner performance, heating, and controls on your GE Profile stove or range, as applicable, and explains the repair estimate.

Book GE Profile Stove Repair

Quick, convenient online scheduling · Opens in a new tab.

GE Profile Stove / Range Repair in Charlotte, NC

E-genius Appliance Repair provides GE Profile stove / range repair in Charlotte, NC for common problems such as burner problems, ignition issues, uneven heating, control faults, or a range that is not operating correctly. Our technicians diagnose the issue, explain the recommended repair, and service compatible GE Profile equipment and models.

Schedule online or call (980) 443-5851 to request stove and range repair.

Open & Available: (980) 443-5851 (980) 443-5851

Easy booking

We're only a few clicks or a phone call away.

In-home estimate

No risk. No pressure.

E-genius Appliance Repair Guarantee

Guaranteed parts and service.

Quality results

Expert technicians.

GE Profile stove troubleshooting

Common GE Profile Stove Problems

Tell us what happens when you use your GE Profile stove or range. An oven-heating, induction-zone or control issue can have different causes depending on the exact US model and its installed features.

Documented scope: US induction range and conditional legacy oven guidance; surface topics: induction, wifi. GE general fault guide is linked from Profile Owner Center. Numeric rows are conditional matching-control coverage, not proof that PHS930 displays all of them. The symptoms below describe potential service scenarios, not measured defect rates or confirmed failed parts.

Power2 topics
  • Not working

    Possible checks: Record power status, display and which functions fail; distinguish no power from locked controls.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Clock resets

    Possible checks: Record outage history and supply stability; a clock reset alone does not prove controller failure.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Controls16 topics
  • Display blank

    Possible checks: Consider power interruption, clock-display setting or control fault; no single diagnosis inferred.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Control panel not responding

    Possible checks: Record lock setting and whether touch surface is dry and clear.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Keeps beeping

    Possible checks: Record displayed message and timing; separate timer or mode alert from repeated fault.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows error code

    Possible checks: Capture exact code, model and operating mode before any reset; use the matching control record.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F0

    Possible checks: Oven key panel fault. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F1

    Possible checks: Oven key panel fault. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F6

    Possible checks: Oven key panel fault. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F7

    Possible checks: Oven key panel fault. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F5

    Possible checks: Electronic oven controller problem. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F8

    Possible checks: Electronic oven controller problem. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows FF

    Possible checks: Electronic oven controller problem. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F96

    Possible checks: Internal component fault; detail unspecified. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F97

    Possible checks: Internal component fault; detail unspecified. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F7X

    Possible checks: Internal component fault; detail unspecified. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows ERR

    Possible checks: Invalid control entry. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F + number or letter

    Possible checks: Oven function fault; obtain exact display. Record the complete display and apply only the matching source.

    Model / feature scope: Range family using owner guide 49-2000990 Rev.6

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Heating6 topics
  • Oven not heating

    Possible checks: Confirm selected mode and whether any surface zone works; diagnosis requires model-specific tests.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven heats slowly

    Possible checks: Compare observed temperature and elapsed time with the owner guide; supply, mode and heating checks are hypotheses.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven shuts off during cooking

    Possible checks: Record timing, code, power events and whether a safety time limit or delayed mode is active.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven will not turn off

    Possible checks: Treat uncontrolled heating as a service issue; stop using the appliance.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Treat uncontrolled heating as a service issue; stop using the appliance.

    Related repair options
  • Bake not working

    Possible checks: Distinguish bake-only failure from all-oven failure; identify gas or electric oven construction.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Broil not working

    Possible checks: Record whether other oven modes work and verify broil mode and door instructions.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Temperature6 topics
  • Oven temperature too low

    Possible checks: Record actual cooking result and selected setting; verify measurement and calibration procedure before blaming a part.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven temperature too high

    Possible checks: Stop cooking if heat is uncontrolled; document setting, actual temperature and displayed code.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven temperature uneven

    Possible checks: Consider rack placement, cookware, convection settings and temperature regulation.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F2

    Possible checks: Oven temperature too high. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F20

    Possible checks: Oven temperature too high. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows OFF

    Possible checks: Temperature prevents selected oven operation. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Door8 topics
  • Oven door will not unlock

    Possible checks: Check temperature and clean-cycle history; do not force a hot locked door.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven door will not close

    Possible checks: Inspect visible obstruction and alignment after cooling; hinge or latch fault requires inspection.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F9

    Possible checks: Oven door-lock circuit problem. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows FC

    Possible checks: Oven door-lock circuit problem. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows Unlock Door

    Possible checks: Door did not release after cleaning. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows Loc Door flashing

    Possible checks: Abnormal door-lock state outside cleaning. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows LOCK DOOR flashing

    Possible checks: Self-clean selected with door open. Record the complete display and apply only the matching source.

    Model / feature scope: Matching GE Profile induction range owner guide

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows DOOR LOCK light on

    Possible checks: Oven still above unlock temperature. Record the complete display and apply only the matching source.

    Model / feature scope: Matching GE Profile induction range owner guide

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Lighting2 topics
  • Oven light not working

    Possible checks: Check owner light settings and cool-appliance lamp procedure; bulb, switch and control are possible causes.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven light stays on

    Possible checks: Check door closure and selected light setting; switch or control fault is a hypothesis.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Cleaning2 topics
  • Self clean not starting

    Possible checks: Equipped self-clean models only; check cool-down, door closure and incompatible functions in the exact owner guide.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Self clean stops early

    Possible checks: Equipped models only; record code, door state and power events; do not repeatedly force a failing clean cycle.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Fan3 topics
  • Oven fan noisy

    Possible checks: Fan-equipped oven only; distinguish normal cooling sounds from new scraping or grinding.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Fan runs after oven off

    Possible checks: Fan-equipped oven only; post-cooking cooling can be normal. Record duration and heat context.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Convection not working

    Possible checks: Convection-equipped oven only; record mode and fan behavior; no motor failure assumed.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Odor2 topics
  • Burning smell

    Possible checks: Record food spill, new-appliance condition and smoke; stop use for electrical-burning symptoms.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Smoking

    Possible checks: Stop the cooking cycle; identify whether food/grease or the appliance is smoking. Do not continue a hazardous cycle.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Supply4 topics
  • Breaker trips

    Possible checks: Discontinue use and have a qualified electrician or service technician assess repeated tripping.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Discontinue use and have a qualified electrician or service technician assess repeated tripping.

    Related repair options
  • Sparks or arcing

    Possible checks: Stop using the appliance; no live electrical troubleshooting by the user.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Stop using the appliance; no live electrical troubleshooting by the user.

    Related repair options
  • Electric shock when touched

    Possible checks: Stop using the range and request qualified assessment of grounding, supply and appliance.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Stop using the range and request qualified assessment of grounding, supply and appliance.

    Related repair options
  • Shows Bad Line

    Possible checks: Supply connection incorrect. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Modes1 topics
  • Controls locked

    Possible checks: Check the exact owner unlock procedure; control lock differs from a hot self-clean door lock.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Induction10 topics
  • Induction burner not heating

    Possible checks: Equipped induction range only; verify compatible cookware and pan detection before suspecting a board.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Pan not detected

    Possible checks: Induction surface only; pan material, base size and placement are possible checks.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction shuts off

    Possible checks: Induction surface only; record pot placement, temperature protection and time-limit messages.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction buzzing

    Possible checks: Induction surface only; cookware and power level can produce normal sound; new abnormal noise needs inspection.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction overheats

    Possible checks: Induction surface only; record displayed protection code and cookware location; allow safe cooldown.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • One induction zone not working

    Possible checks: Induction surface only; compare cookware on another suitable zone and record the display.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • All induction zones not working

    Possible checks: Induction surface only; power, demo/lock state and common control fault are possibilities.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction power boost unavailable

    Possible checks: Equipped boost feature only; power sharing or operating limits may be normal.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction controls flashing

    Possible checks: Induction surface only; identify pan warning versus temperature or touch-control alert.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction glass cracked

    Possible checks: Glass induction surface only; discontinue use of a cracked surface and request service.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Glass induction surface only; discontinue use of a cracked surface and request service.

    Related repair options
Connectivity1 topics
  • WiFi connection failed

    Possible checks: Connected models only; follow the applicable pairing and network instructions. Connection failure alone does not diagnose a heating defect.

    Model / feature scope: US induction range and conditional legacy oven guidance. Researched families in Overview only. Apply each topic only where the model has the named feature. Wi-Fi-equipped control only.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Sensor3 topics
  • Shows F3

    Possible checks: Oven temperature sensor problem. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F4

    Possible checks: Oven temperature sensor problem. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows FD

    Possible checks: Meat probe or receptacle problem. Record the complete display and apply only the matching source.

    Model / feature scope: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options

These are possible symptoms, not confirmed component failures. Gas, electric and induction features vary by model. Never bypass interlocks or attempt internal gas or high-voltage diagnostics.

Diagnosis before parts replacement

GE Profile Stove Repairs and Parts Replacement

Different GE Profile stove faults can produce similar symptoms. The full model number, cooking-fuel configuration, fault history and inspection findings guide which repair or replacement parts are appropriate.

GE Profile Oven Heating and Temperature Repairs

We assess the oven mode, measured performance, temperature sensing and the heat source fitted to your GE Profile range before recommending a bake element, igniter or other part. Uneven baking does not, by itself, identify a failed sensor.

GE Profile Range Controls and Display Repairs

A blank display, repeated fault or unresponsive keypad may involve operating settings, the power supply or the electronic control. We confirm the specific GE Profile model and documented control family before selecting a replacement component.

GE Profile Induction Surface and Pan-Detection Repairs

For induction-equipped GE Profile ranges, cookware compatibility, zone detection and protective shutdowns are assessed before considering sensors or power electronics. Not every induction warning indicates a damaged module.

GE Profile Oven Door, Hinge and Latch Service

Poor door closure or a locked oven requires review of hinge alignment, seal condition, cleaning status and the latch or switch system installed on the GE Profile model. Do not force a hot locked oven door or defeat its safety switch.

GE Profile Convection Fan and Oven Ventilation Service

Noise, intermittent air circulation and temperature variation can be related to fan operation, airflow or control behavior. We assess whether the exact GE Profile range has convection and whether the fan cycle is normal.

GE Profile Sensors, Protection and Circuit Testing

Recurring temperature codes, uncontrolled heating and repeated breaker trips call for qualified electrical and protection-system assessment. A code is a diagnostic starting point, not proof that the named part must be replaced.

Share the full GE Profile model number, fuel type, affected burner or oven mode, and any exact error message. Assessment and service depend on model compatibility and local availability.

Request GE Profile Stove Service
Model-specific reference

GE Profile Stove Error Codes & Messages

These 26 reference entries are for particular US GE Profile range controls and documented model families. Faults, warnings, normal operating modes and diagnostic results are labeled separately. The displayed code alone does not prove a component failure.

Check your exact model first: GE general fault guide is linked from Profile Owner Center. Numeric rows are conditional matching-control coverage, not proof that PHS930 displays all of them. 4 entries have unresolved component-level meaning and require model-specific verification.

26 documented records across control families. Choose the exact model before using a code definition.

F0Fault

Oven key panel fault

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F1Fault

Oven key panel fault

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F6Fault

Oven key panel fault

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F7Fault

Oven key panel fault

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F2Fault

Oven temperature too high

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F20Fault

Oven temperature too high

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F3Fault

Oven temperature sensor problem

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F4Fault

Oven temperature sensor problem

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F5Fault

Electronic oven controller problem

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F8Fault

Electronic oven controller problem

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
FFFault

Electronic oven controller problem

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F9Fault

Oven door-lock circuit problem

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
FCFault

Oven door-lock circuit problem

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
FDFault

Meat probe or receptacle problem

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
Bad LineFault

Supply connection incorrect

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: General GE USA code guidance. Article does not split F3/F4 into open vs short. Match actual model before using any meaning.

Technical referenceTechnical reference
F96Model check

Internal component fault; detail unspecified

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: Manufacturer requests service but does not identify the component in this guide.

Technical referenceTechnical reference
F97Model check

Internal component fault; detail unspecified

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: Manufacturer requests service but does not identify the component in this guide.

Technical referenceTechnical reference
F7XModel check

Internal component fault; detail unspecified

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: Manufacturer requests service but does not identify the component in this guide.

Technical referenceTechnical reference
Unlock DoorWarning

Door did not release after cleaning

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Technical referenceTechnical reference
Loc Door flashingWarning

Abnormal door-lock state outside cleaning

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Technical referenceTechnical reference
ERRWarning

Invalid control entry

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Technical referenceTechnical reference
OFFWarning

Temperature prevents selected oven operation

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Technical referenceTechnical reference
LOCNormal mode

Child-lock setting enabled

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US GE Profile oven controls matching GE1; conditional general guide linked by GP1, not an all-PHS930 code inventory

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Technical referenceTechnical reference
F + number or letterModel check

Oven function fault; obtain exact display

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: Range family using owner guide 49-2000990 Rev.6

Scope: Generic owner indication only; separate from the conditional GE1 component map.

Manufacturer reference
LOCK DOOR flashingWarning

Self-clean selected with door open

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: Matching GE Profile induction range owner guide

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Manufacturer reference
DOOR LOCK light onWarning

Oven still above unlock temperature

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: Matching GE Profile induction range owner guide

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Manufacturer reference

Selected technical sources: Range / Wall Oven - Oven Error, Fault or Function Codes · PHS930BLTS Owner Center · GE Profile range owner guide 49-2000990 Rev.6. The source family and manual revision must match the equipment. These records are not a complete code catalog for every model.

Professional service

When to Schedule GE Profile Stove Repair

Schedule a GE Profile range assessment when oven, induction cooking-zone or control problems persist after safe checks in the owner manual. Tell us the installed fuel or induction type, full model number and any exact display code.

  • An oven or surface zone repeatedly fails to heat or maintain temperature.
  • Normal cooking cycles stop unexpectedly or the controls do not respond.
  • The same error or warning returns after owner-manual checks.
  • An induction zone repeatedly stops, fails to detect suitable cookware or displays a fault.
  • The oven door or protective lock mechanism does not operate normally.
  • A qualified technician is needed to test wiring, ignition, heating or control components.

GE Profile Stove Repair? Read Our Reviews

If your GE Profile stove has unresponsive controls or burners that will not light, take a moment to review the feedback Charlotte homeowners have shared about working with E-genius Appliance Repair on Google.

5.0 200+ Google reviews READ ALL GOOGLE REVIEWS

Already our customer?

If we've helped with your GE Profile stove, consider leaving a Google review about your experience. We value both praise and constructive suggestions because they help our service get better.

Leave a Google review
Illustration of an E-genius Appliance Repair technician and a homeowner in a kitchen

Thank you for your support!

Stove repair in Charlotte, NC

GE Profile Stove Repair

GE Profile range controls unresponsive, burner heating unevenly, or oven temperature off? Let us know the model and any screen message when requesting a callback.

  • Touch-control and heating faults
  • GE Profile model details
Illustration of a freestanding kitchen stove for GE Profile repair inquiries

Request a Call Back

Leave your number. We'll call you about your GE Profile stove.

Your details are used to respond to your callback request.

Have questions? We have answers.

Frequently Asked Questions About GE Profile Stove Repair

What does “F0” mean on my GE Profile stove?

For compatible U.S. GE Profile oven controls covered by the general GE fault guide; verify the exact range model, “F0” indicates oven key panel fault. Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

What does “LOC” indicate on my GE Profile stove?

For compatible U.S. GE Profile oven controls covered by the general GE fault guide; verify the exact range model, “LOC” indicates child-lock setting enabled. Use the exact owner guide to change the lock setting. Record any message and seek service if normal control operation does not return afterward.

Why is baking uneven in my GE Profile range?

Check cookware, rack position, preheating, and the selected conventional or convection mode. Record the pattern and any change from normal results. Continued uneven baking can require oven-temperature, heating, and airflow checks using the exact range model.

Why is the oven in my GE Profile range slow to preheat?

Record the selected temperature, mode, cavity, and elapsed time and compare with the owner guide. Report whether Bake, Broil, and surface cooking still work. Changed preheat performance can involve heating, ignition on gas models, sensing, or supply.

Other GE Profile Appliances We Service

We handle more than GE Profile stove service. The links below cover other GE Profile appliances our technicians service, while our team can also review requests for GE Profile equipment that is not shown here.

(980) 443-5851 call me back