Online booking opens in a new tab.
Need GE Profile dishwasher repair in Charlotte, NC? Tell us about not draining or not filling and choose a service visit.
Report not draining, not filling, or an error message if shown. Include the GE Profile dishwasher model number.
Choose an available time for your GE Profile dishwasher repair appointment in Charlotte.
Our technician checks drainage, leaks, and wash performance on your GE Profile dishwasher, as applicable, and explains the repair estimate.
Quick, convenient online scheduling · Opens in a new tab.
E-genius Appliance Repair provides GE Profile dishwasher repair in Charlotte, NC for common problems such as drainage problems, leaks, poor cleaning, unusual noises, or a dishwasher that will not start or complete a cycle. Our technicians diagnose the issue, explain the recommended repair, and service compatible GE Profile equipment and models.
Schedule online or call (980) 443-5851 to request dishwasher repair.
We're only a few clicks or a phone call away.
No risk. No pressure.
Guaranteed parts and service.
Expert technicians.
Describe what happens with your GE Profile dishwasher: standing water, leaks, poor cleaning or drying, a cycle that will not start, or a display message. Include the full model number, selected cycle and exact code or indicator pattern.
Researched US model and feature scope: Built-in specified Profile family (wifi). PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0. Leak and real operating states; no C-series meanings assigned by brand analogy. These are potential service-intake scenarios, not measured failure frequencies or confirmed defective parts.
Check owner-accessible filters and visible hose routing; note sink/disposer condition and any air gap. Drain-pump...
Record water-supply valve status, visible hose bends, recent installation and full code. Valve, flow meter and...
Stop the wash and shut water supply if safe. Follow the model-specific protection response; keep electrical areas dry...
Record loading, visible seal condition, suds and whether the appliance is level. Door alignment / seal replacement...
Check exact start-door sequence, door closure, Delay and lock if fitted. Record lights and code rather than assuming a...
Review loading, blocked spray paths, filter condition, cycle and proper detergent. Poor wash-pump performance is a...
Check rinse aid, material, selected drying option and owner unload / wait guidance. Condensation, fan, heated and...
Look for cookware blocking the accessible dispenser and follow the loading guide. Actuator/control faults require...
Possible checks: Check owner-accessible filters and visible hose routing; note sink/disposer condition and any air gap. Drain-pump failure is a hypothesis until diagnosed.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record water-supply valve status, visible hose bends, recent installation and full code. Valve, flow meter and pressure-sensor faults are hypotheses.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Stop the wash and shut water supply if safe. Follow the model-specific protection response; keep electrical areas dry and arrange service. Do not bypass a float or leak sensor.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Stop the wash and shut water supply if safe. Follow the model-specific protection response; keep electrical areas dry and arrange service. Do not bypass a float or leak sensor.
Related repair optionsPossible checks: Record loading, visible seal condition, suds and whether the appliance is level. Door alignment / seal replacement requires inspection.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check exact start-door sequence, door closure, Delay and lock if fitted. Record lights and code rather than assuming a control-board failure.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record display state and household supply interruptions. Follow owner checks; repeated trips require qualified assessment.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record elapsed time, code, door condition and clock/display reset. Supply, latch, heating or pump faults are possible explanations.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Compare the selected cycle/options, soil and incoming-water conditions with owner timing; sensor/heating delays may extend a normal cycle.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Review loading, blocked spray paths, filter condition, cycle and proper detergent. Poor wash-pump performance is a service hypothesis.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Review loading and spray-arm obstruction; check upper-rack engagement where fitted. Diverter / circulation faults require diagnosis.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Inspect accessible spray-arm obstruction and loading. Do not infer a failed wash motor from a single poor result.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check rinse aid, material, selected drying option and owner unload / wait guidance. Condensation, fan, heated and zeolite drying differ by model.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record selected program, supplied water and full message. Heater, relay and sensing failures are service hypotheses; internal electrical tests require qualification.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Sanitize-equipped model only; confirm that option and whether temperature or interruption prevented completion. The light alone does not diagnose a heater.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Look for cookware blocking the accessible dispenser and follow the loading guide. Actuator/control faults require service diagnosis.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Compare proper detergent storage, dispenser dryness/loading, water conditions and spray-arm obstruction. A tablet left behind is not a code-to-part diagnosis.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Use only dishwasher detergent. Record spilled rinse aid and product amount; follow the exact owner foam-removal guidance.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Distinguish removable hard-water film from permanent etching; review detergent and rinse aid. Use softener settings only if installed.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Review rinse-aid level, water hardness and drying result; use owner-approved maintenance.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Review accessible filter, food debris and owner maintenance. Installation/backflow is a hypothesis if odor accompanies drainage problems.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record whether noise occurs during fill, circulation or drain. Pump blockage / motor problems need qualified diagnosis.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: With operation stopped and components cool, inspect owner-accessible filter area for debris. Pump disassembly is a service task.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check accessible spray-arm clearance and whether utensils contact an arm. Record whether the noise follows filling or washing.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record complete code, flash groups, door state and timing. End-of-cycle reminders and door alerts are not always faults.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record exact lights, simultaneous/alternating pattern and flash count with pauses. A generic blinking light cannot be assigned a numeric fault.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check lock state, external moisture and owner start sequence. Keypad / control failure is only a hypothesis.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Use the exact owner cancel/drain sequence; it is not universal. Record whether leak protection is keeping the drain pump active.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check visible obstruction and rack position; do not force a damaged latch. Closure-switch failure requires service inspection.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: If fitted, use the exact owner unlock procedure. Brand/model button combinations differ.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record leak code, visible water and whether the door is open. Protection can force pumping; follow the actual model response before interrupting it.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Shut water supply if safe and arrange service. Record whether the water is clean supply water or dirty backflow; do not assume a valve until inspected.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Shut water supply if safe and arrange service. Record whether the water is clean supply water or dirty backflow; do not assume a valve until inspected.
Related repair optionsPossible checks: Record sink/disposer use and visible drain routing / air gap. Check installation against the model instructions.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Stop use after repeated trips; arrange qualified electrical and appliance assessment. Do not keep resetting or enlarge circuit protection.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Stop use after repeated trips; arrange qualified electrical and appliance assessment. Do not keep resetting or enlarge circuit protection.
Related repair optionsPossible checks: Stop use for an electrical smell or smoke and isolate power only if safe. Record whether a plastic item contacted an exposed heater on an equipped model; arrange service as needed.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Stop use for an electrical smell or smoke and isolate power only if safe. Record whether a plastic item contacted an exposed heater on an equipped model; arrange service as needed.
Related repair optionsPossible checks: Identify exact model and affected rack. Check accessible wheel / rail damage; avoid operating with damaged rack parts obstructing spray or door closure.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Connected model only; follow exact pairing guide and record AP / app status. A pairing issue alone is not a wash-pump fault.
Model / feature scope: Built-in specified Profile family. Researched model / control limits in Overview. Apply any named feature only if installed. wifi-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Leak protection detected a possible leak; cycle stops. Record the exact model, controller and display context.
Model / feature scope: GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsThese descriptions represent possible service scenarios, not confirmed part failures. Follow the owner manual for your exact model. Stop using an actively leaking dishwasher and keep water away from electrical areas; never bypass flood or door protections.
GE Profile dishwashers vary by rack design, controls, water systems and drying technologies. We first establish the exact model and affected cycle before recommending a replacement component.
Persistent standing water in your GE Profile dishwasher may relate to filtration, drain routing, a sink/disposer connection or the drainage system. Owner-accessible filter checks come first; pump diagnosis follows the exact model and documented symptoms.
If the GE Profile dishwasher does not fill or repeatedly pauses during filling, we review the water supply, installed inlet system and any fitted level or overflow sensor. One code does not confirm a failed inlet valve.
Poor cleaning, weak spray action or unusual wash noise can involve blocked owner-accessible spray paths, loading conditions or circulating-water problems. Model-specific circulation components are assessed only after proper diagnosis.
We compare the selected wash program, rinse-aid settings and actual heating or drying behavior on your GE Profile model before considering a heater, fan, thermostat or temperature sensor.
Leaks at the door or beneath a GE Profile dishwasher require prompt attention. Door sealing, tub condition, installation and fitted float or flood-protection systems are checked using the correct model documentation.
Detergent release, door/control response and recurring error messages on a GE Profile dishwasher are checked against the installed features and controller. A displayed fault alone does not prove which replacement part is needed.
Tell us the full GE Profile dishwasher model, the selected program, where any water is collecting and the full displayed error or light sequence. Model compatibility, diagnosis and parts availability determine repair options.
Request GE Profile Dishwasher ServiceThese 7 researched GE Profile dishwasher entries cover fault codes, safety warnings, protective states, maintenance prompts and ordinary indicators where documented. Interpret each against the full model and controller generation.
Model and control limits: PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0. Leak and real operating states; no C-series meanings assigned by brand analogy. Control Lock, Delay Start, Add Rinse Aid and other ordinary prompts are not automatically equipment failures.
7 researched codes and status messages; 0 require model-specific verification. A code alone is not proof of a failed component.
What to do: Record full model/suffix, complete code or blink sequence, operating mode and timing. Follow the matching owner guide; persistent faults require qualified appliance service. A code is not proof that a specific part has failed.
Applies to: GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0
Scope: Leak-detection-equipped variant only; exact leak source is not identified by this message.
Manufacturer / technical referenceWhat to do: Use the exact owner instructions for this setting or prompt; document symptoms that persist after the normal condition is resolved.
Applies to: GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0
Scope: Owner-described state or setting; not a failed-component code. Descriptive indicator names are not asserted to be literal text displays.
Manufacturer / technical referenceWhat to do: Use the exact owner instructions for this setting or prompt; document symptoms that persist after the normal condition is resolved.
Applies to: GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0
Scope: Owner-described state or setting; not a failed-component code. Descriptive indicator names are not asserted to be literal text displays.
Manufacturer / technical referenceWhat to do: Use the exact owner instructions for this setting or prompt; document symptoms that persist after the normal condition is resolved.
Applies to: GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0
Scope: Owner-described state or setting; not a failed-component code. Descriptive indicator names are not asserted to be literal text displays.
Manufacturer / technical referenceWhat to do: Use the exact owner instructions for this setting or prompt; document symptoms that persist after the normal condition is resolved.
Applies to: GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0
Scope: Sanitize-equipped controls only. Absence of this light after a non-sanitize or interrupted cycle is not an automatic heater diagnosis.
Manufacturer / technical referenceWhat to do: Use the exact owner instructions for this setting or prompt; document symptoms that persist after the normal condition is resolved.
Applies to: GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0
Scope: Owner-described state or setting; not a failed-component code. Descriptive indicator names are not asserted to be literal text displays.
Manufacturer / technical referenceWhat to do: Use the exact owner instructions for this setting or prompt; document symptoms that persist after the normal condition is resolved.
Applies to: GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0
Scope: Equipped fan-assisted drying variant only; up to 90 minutes described in this guide. Behavior label, not a literal numeric error.
Manufacturer / technical referenceNo matching records. Check the exact model, displayed characters, and chosen cycle.
Selected technical references: GD*565-665 / DD*700 / PD*715-785 owner guide 49-4000270 Rev0. Only use definitions documented for matching US models and control generations.
Arrange a GE Profile dishwasher assessment when draining, filling, cleaning or drying remains unreliable after safe owner-manual checks, or when a persistent model-specific warning interrupts normal operation. Provide the complete model and cycle information.
Comparing repair options for your GE Profile dishwasher? Explore Google reviews about E-genius Appliance Repair from local customers while you decide how to handle unusual noises or poor cleaning performance.
5.0 200+ Google reviews READ ALL GOOGLE REVIEWSHave we repaired your GE Profile dishwasher? A Google review about your appointment helps our technicians keep improving and helps other local homeowners evaluate their options.
Leave a Google review
Thank you for your support!
Dishwasher repair in Charlotte, NC
GE Profile dishwasher showing an error, making unfamiliar sounds, or leaving dishes wet? Share the appliance model and symptoms so we can discuss suitable repair options.
Your details are used to respond to your callback request.
Have questions? We have answers.
For GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0, “Control Lock light” indicates control selections locked. Use the exact owner guide to change the lock setting. Record any message and seek service if normal control operation does not return afterward.
For GE Profile PD*715-785 / PDT715SYNFS-associated 49-4000270 Rev0, “Delay / Delay Hours” indicates program start intentionally delayed. Check the exact model’s owner instructions for this operating state. If the appliance behaves differently from those instructions, report the setting, full model number, and accompanying symptoms.
Check loading, free spray-arm movement, the owner-accessible filter, detergent, and cycle selection. Note whether the problem affects both racks or only one. Continued poor results can require checks of filling, circulation, and heating for the exact model.
Review the drying option, rinse-aid instructions, and loading arrangement. Plastics may retain more water than other items. Tell the technician whether the result has recently changed and whether the whole load, rather than a few plastic pieces, stays wet.
Looking after several GE Profile appliances at home? Along with dishwasher service, our technicians work with the other GE Profile appliance types listed below. Choose a category or contact us about a different GE Profile model.
ask for help
ask for help
ask for help
ask for help
ask for help
ask for help
ask for help
Leave a request and our manager will give answers to all questions
call me backYour message has been successfully sent. We will contact you very soon!
