E-Genius Appliance Repair EPA Universal CertifiedEPA Certified $2M Insured Registered Charlotte, NC BusinessRegistered in Charlotte, NC

Whirlpool
Stove Repair

Experienced technicians serving your neighborhood.

Whirlpool Stove Repair in 3 Steps

Need Whirlpool stove repair in Charlotte, NC? Tell us about burners that will not ignite or uneven heating and choose a service visit.

  1. Describe Your Stove Issue

    Report burners that will not ignite, uneven heating, or an error message if shown. Include the Whirlpool stove or range model number.

  2. Schedule Stove Service

    Choose an available time for your Whirlpool stove repair appointment in Charlotte.

  3. Review Repair Options

    Our technician checks burner performance, heating, and controls on your Whirlpool stove or range, as applicable, and explains the repair estimate.

Book Whirlpool Stove Repair

Quick, convenient online scheduling · Opens in a new tab.

Whirlpool Stove Repair in Charlotte, NC

Need help with your Whirlpool stove? E-genius Appliance Repair diagnoses common problems such as burners that will not heat or ignite, uneven heating, or control problems in Charlotte, NC. Our technicians focus on the appliance fault, explain the recommended repair, and use repair procedures appropriate for the model.

Schedule online or call (980) 443-5851 to request Whirlpool stove repair.

Open & Available: (980) 443-5851 (980) 443-5851

Easy booking

We're only a few clicks or a phone call away.

In-home estimate

No risk. No pressure.

E-genius Appliance Repair Guarantee

Guaranteed parts and service.

Quality results

Expert technicians.

Whirlpool stove troubleshooting

Common Whirlpool Stove Problems

Tell us what happens when you use your Whirlpool stove or range. An oven-heating, gas-ignition or control issue can have different causes depending on the exact US model and its installed features.

Documented scope: US gas / electric range; surface topics: gas, electric. W11174814 control families and official USA settings guidance. Control identification remains mandatory. The symptoms below describe potential service scenarios, not measured defect rates or confirmed failed parts.

Power2 topics
  • Not working

    Possible checks: Record power status, display and which functions fail; distinguish no power from locked controls.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Clock resets

    Possible checks: Record outage history and supply stability; a clock reset alone does not prove controller failure.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Controls12 topics
  • Display blank

    Possible checks: Consider power interruption, clock-display setting or control fault; no single diagnosis inferred.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Control panel not responding

    Possible checks: Record lock setting and whether touch surface is dry and clear.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Keeps beeping

    Possible checks: Record displayed message and timing; separate timer or mode alert from repeated fault.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows error code

    Possible checks: Capture exact code, model and operating mode before any reset; use the matching control record.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F1 E0

    Possible checks: EEPROM communication fault. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F1 E9

    Possible checks: WIDE message queue overflow. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F2 E0

    Possible checks: Keypad connection missing. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F2 E1

    Possible checks: Key input remains active. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F2 E2

    Possible checks: Cancel button input fault. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F2 E0

    Possible checks: Key input short circuit. Record the complete display and apply only the matching source.

    Model / feature scope: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F2 E1

    Possible checks: Key input short circuit. Record the complete display and apply only the matching source.

    Model / feature scope: US LCX control only, W11174814

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F1

    Possible checks: Internal electronic control failure. Record the complete display and apply only the matching source.

    Model / feature scope: US LCC90/95 simplified control only, W11174814

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Heating6 topics
  • Oven not heating

    Possible checks: Confirm selected mode and whether any surface zone works; diagnosis requires model-specific tests.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven heats slowly

    Possible checks: Compare observed temperature and elapsed time with the owner guide; supply, mode and heating checks are hypotheses.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven shuts off during cooking

    Possible checks: Record timing, code, power events and whether a safety time limit or delayed mode is active.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven will not turn off

    Possible checks: Treat uncontrolled heating as a service issue; stop using the appliance.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Treat uncontrolled heating as a service issue; stop using the appliance.

    Related repair options
  • Bake not working

    Possible checks: Distinguish bake-only failure from all-oven failure; identify gas or electric oven construction.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Broil not working

    Possible checks: Record whether other oven modes work and verify broil mode and door instructions.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Temperature8 topics
  • Oven temperature too low

    Possible checks: Record actual cooking result and selected setting; verify measurement and calibration procedure before blaming a part.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven temperature too high

    Possible checks: Stop cooking if heat is uncontrolled; document setting, actual temperature and displayed code.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven temperature uneven

    Possible checks: Consider rack placement, cookware, convection settings and temperature regulation.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F6 E1

    Possible checks: Cooking temperature exceeds limit. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F6 E2

    Possible checks: Self-clean temperature exceeds limit. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F6 E3

    Possible checks: Warming drawer exceeds temperature limit. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F3 E2

    Possible checks: Bake or broil temperature exceeds limit. Record the complete display and apply only the matching source.

    Model / feature scope: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F3 E3

    Possible checks: Self-clean temperature exceeds limit. Record the complete display and apply only the matching source.

    Model / feature scope: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Door5 topics
  • Oven door will not unlock

    Possible checks: Check temperature and clean-cycle history; do not force a hot locked door.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven door will not close

    Possible checks: Inspect visible obstruction and alignment after cooling; hinge or latch fault requires inspection.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F5 E0

    Possible checks: Clean-cycle door switch disagreement. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F5 E1

    Possible checks: Clean latch operation failed. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F5 E2

    Possible checks: Clean-cycle door switch disagreement. Record the complete display and apply only the matching source.

    Model / feature scope: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Lighting2 topics
  • Oven light not working

    Possible checks: Check owner light settings and cool-appliance lamp procedure; bulb, switch and control are possible causes.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven light stays on

    Possible checks: Check door closure and selected light setting; switch or control fault is a hypothesis.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Cleaning2 topics
  • Self clean not starting

    Possible checks: Equipped self-clean models only; check cool-down, door closure and incompatible functions in the exact owner guide.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Self clean stops early

    Possible checks: Equipped models only; record code, door state and power events; do not repeatedly force a failing clean cycle.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Fan3 topics
  • Oven fan noisy

    Possible checks: Fan-equipped oven only; distinguish normal cooling sounds from new scraping or grinding.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Fan runs after oven off

    Possible checks: Fan-equipped oven only; post-cooking cooling can be normal. Record duration and heat context.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Convection not working

    Possible checks: Convection-equipped oven only; record mode and fan behavior; no motor failure assumed.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Odor2 topics
  • Burning smell

    Possible checks: Record food spill, new-appliance condition and smoke; stop use for electrical-burning symptoms.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Smoking

    Possible checks: Stop the cooking cycle; identify whether food/grease or the appliance is smoking. Do not continue a hazardous cycle.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Supply4 topics
  • Breaker trips

    Possible checks: Discontinue use and have a qualified electrician or service technician assess repeated tripping.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Discontinue use and have a qualified electrician or service technician assess repeated tripping.

    Related repair options
  • Sparks or arcing

    Possible checks: Stop using the appliance; no live electrical troubleshooting by the user.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Stop using the appliance; no live electrical troubleshooting by the user.

    Related repair options
  • Electric shock when touched

    Possible checks: Stop using the range and request qualified assessment of grounding, supply and appliance.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Stop using the range and request qualified assessment of grounding, supply and appliance.

    Related repair options
  • Shows F9 E0

    Possible checks: Range or household supply miswired. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Modes1 topics
  • Controls locked

    Possible checks: Check the exact owner unlock procedure; control lock differs from a hot self-clean door lock.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Ignition4 topics
  • Gas burner not igniting

    Possible checks: Gas-surface models only; confirm correct burner-cap seating and whether clicking is present after cooling.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Burner keeps clicking

    Possible checks: Gas-surface models only; moisture, cap position or ignition system are possible explanations.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Burner does not click

    Possible checks: Gas-surface models only; record whether other burners spark; qualified diagnosis may be needed.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Delayed ignition

    Possible checks: Gas-surface models only; stop repeated attempts when gas accumulates or ignition is delayed; request service.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Gas-surface models only; stop repeated attempts when gas accumulates or ignition is delayed; request service.

    Related repair options
Surface15 topics
  • One gas burner not working

    Possible checks: Gas-surface models only; compare with other burners and record visible cap/port condition.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Gas flame uneven

    Possible checks: Gas-surface models only; inspect cooled cap seating and ports per owner guide.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Gas flame yellow or sooty

    Possible checks: Gas-surface models only; stop use if combustion is abnormal and request service; gas type and adjustment require qualified personnel.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Gas-surface models only; stop use if combustion is abnormal and request service; gas type and adjustment require qualified personnel.

    Related repair options
  • Gas flame too low

    Possible checks: Gas-surface models only; gas supply, ports or setting may need assessment.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Gas flame too high

    Possible checks: Gas-surface models only; do not adjust gas pressure or conversion components yourself.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Gas burner goes out

    Possible checks: Gas-surface models only; record simmer setting, drafts and whether relight occurs.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Burner cap not seated

    Possible checks: Gas-surface models only; let burner cool and follow owner seating instructions.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Electric burner not heating

    Possible checks: Electric radiant/coil surface only; record whether one or all zones fail.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Radiant / coil ELECTRIC SURFACE only. Dual-fuel electric oven does not imply an electric cooktop.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Electric burner stuck on high

    Possible checks: Electric radiant/coil surface only; discontinue use if heat cannot be controlled.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Radiant / coil ELECTRIC SURFACE only. Dual-fuel electric oven does not imply an electric cooktop.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Electric burner will not turn off

    Possible checks: Electric radiant/coil surface only; stop use and request qualified service for uncontrolled heat.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Radiant / coil ELECTRIC SURFACE only. Dual-fuel electric oven does not imply an electric cooktop.

    Next step: Electric radiant/coil surface only; stop use and request qualified service for uncontrolled heat.

    Related repair options
  • Burner heats intermittently

    Possible checks: Electric radiant surface only; cycling may be normal temperature regulation; compare with owner guide.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Radiant / coil ELECTRIC SURFACE only. Dual-fuel electric oven does not imply an electric cooktop.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • All electric burners not working

    Possible checks: Electric radiant/coil surface only; power and control settings are possible checks for a technician.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Radiant / coil ELECTRIC SURFACE only. Dual-fuel electric oven does not imply an electric cooktop.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Hot surface light stays on

    Possible checks: Equipped electric surface only; allow full cooldown, then assess persistent indication.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Radiant / coil ELECTRIC SURFACE only. Dual-fuel electric oven does not imply an electric cooktop.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Glass top cracked

    Possible checks: Glass surface only; stop using a cracked cooking surface and arrange repair.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Radiant / coil ELECTRIC SURFACE only. Dual-fuel electric oven does not imply an electric cooktop.

    Next step: Glass surface only; stop using a cracked cooking surface and arrange repair.

    Related repair options
  • Dual element not working

    Possible checks: Equipped expandable radiant element only; verify selected inner/outer zone.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Radiant / coil ELECTRIC SURFACE only. Dual-fuel electric oven does not imply an electric cooktop.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Gas safety1 topics
  • Gas smell

    Possible checks: Treat gas odor as a possible leak. Leave the area; do not operate switches or flames. Contact the gas supplier or emergency service from outside.

    Model / feature scope: US gas / electric range. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Treat gas odor as a possible leak. Leave the area; do not operate switches or flames. Contact the gas supplier or emergency service from outside.

    Related repair options
Sensor6 topics
  • Shows F1 E5

    Possible checks: Sensor reading outside limits. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F1 E7

    Possible checks: Control-board thermistor circuit fault. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F3 E0

    Possible checks: Main oven sensor circuit fault. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F3 E2

    Possible checks: Warming-drawer sensor circuit fault. Record the complete display and apply only the matching source.

    Model / feature scope: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F3 E0

    Possible checks: Oven sensor circuit open. Record the complete display and apply only the matching source.

    Model / feature scope: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F3 E1

    Possible checks: Oven sensor circuit short. Record the complete display and apply only the matching source.

    Model / feature scope: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options

These are possible symptoms, not confirmed component failures. Gas, electric and induction features vary by model. Never bypass interlocks or attempt internal gas or high-voltage diagnostics.

Diagnosis before parts replacement

Whirlpool Stove Repairs and Parts Replacement

Different Whirlpool stove faults can produce similar symptoms. The full model number, cooking-fuel configuration, fault history and inspection findings guide which repair or replacement parts are appropriate.

Whirlpool Oven Heating and Temperature Repairs

We assess the oven mode, measured performance, temperature sensing and the heat source fitted to your Whirlpool range before recommending a bake element, igniter or other part. Uneven baking does not, by itself, identify a failed sensor.

Whirlpool Range Controls and Display Repairs

A blank display, repeated fault or unresponsive keypad may involve operating settings, the power supply or the electronic control. We confirm the specific Whirlpool model and documented control family before selecting a replacement component.

Whirlpool Gas Burner Ignition and Flame Service

On gas-equipped Whirlpool ranges, burner ignition, clicking or unstable flames require model-specific checks of accessible burner condition and the ignition system. Gas-line, valve and internal ignition work must be handled by a qualified professional.

Whirlpool Electric Surface Element Repairs

On Whirlpool models with electric surface burners, we distinguish a burner, temperature limiter, control or supply fault after confirming the installed element type. Electric-oven heating alone does not mean the cooktop uses electric elements.

Whirlpool Oven Door, Hinge and Latch Service

Poor door closure or a locked oven requires review of hinge alignment, seal condition, cleaning status and the latch or switch system installed on the Whirlpool model. Do not force a hot locked oven door or defeat its safety switch.

Whirlpool Convection Fan and Oven Ventilation Service

Noise, intermittent air circulation and temperature variation can be related to fan operation, airflow or control behavior. We assess whether the exact Whirlpool range has convection and whether the fan cycle is normal.

Share the full Whirlpool model number, fuel type, affected burner or oven mode, and any exact error message. Assessment and service depend on model compatibility and local availability.

Request Whirlpool Stove Service
Model-specific reference

Whirlpool Stove Error Codes & Messages

These 24 reference entries are for particular US Whirlpool range controls and documented model families. Faults, warnings, normal operating modes and diagnostic results are labeled separately. The displayed code alone does not prove a component failure.

Check your exact model first: W11174814 control families and official USA settings guidance. Control identification remains mandatory.

24 documented records across control families. Choose the exact model before using a code definition.

F1 E0Fault

EEPROM communication fault

Also shown as: F1E0

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F1 E5Fault

Sensor reading outside limits

Also shown as: F1E5

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F1 E7Fault

Control-board thermistor circuit fault

Also shown as: F1E7

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F1 E9Fault

WIDE message queue overflow

Also shown as: F1E9

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F2 E0Fault

Keypad connection missing

Also shown as: F2E0

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F2 E1Fault

Key input remains active

Also shown as: F2E1

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F2 E2Fault

Cancel button input fault

Also shown as: F2E2

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F3 E0Fault

Main oven sensor circuit fault

Also shown as: F3E0

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F3 E2Fault

Warming-drawer sensor circuit fault

Also shown as: F3E2

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F5 E0Fault

Clean-cycle door switch disagreement

Also shown as: F5E0

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F5 E1Fault

Clean latch operation failed

Also shown as: F5E1

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F6 E1Fault

Cooking temperature exceeds limit

Also shown as: F6E1

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F6 E2Fault

Self-clean temperature exceeds limit

Also shown as: F6E2

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F6 E3Fault

Warming drawer exceeds temperature limit

Also shown as: F6E3

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F9 E0Fault

Range or household supply miswired

Also shown as: F9E0

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list

Scope: Match Maxwell/MRC control and technical sheet. Drawer faults require a heated warming drawer; clean latch codes require self-clean. F3 E2 has a different meaning on LCC/LCX.

Manufacturer reference
F2 E0Fault

Key input short circuit

Also shown as: F2E0

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

Scope: LCC180/190 table. LCX shorted-key display can be F2 E1. Do not apply the Maxwell warming-drawer meaning to LCC F3 E2.

Manufacturer reference
F3 E0Fault

Oven sensor circuit open

Also shown as: F3E0

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

Scope: LCC180/190 table. LCX shorted-key display can be F2 E1. Do not apply the Maxwell warming-drawer meaning to LCC F3 E2.

Manufacturer reference
F3 E1Fault

Oven sensor circuit short

Also shown as: F3E1

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

Scope: LCC180/190 table. LCX shorted-key display can be F2 E1. Do not apply the Maxwell warming-drawer meaning to LCC F3 E2.

Manufacturer reference
F3 E2Fault

Bake or broil temperature exceeds limit

Also shown as: F3E2

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

Scope: LCC180/190 table. LCX shorted-key display can be F2 E1. Do not apply the Maxwell warming-drawer meaning to LCC F3 E2.

Manufacturer reference
F3 E3Fault

Self-clean temperature exceeds limit

Also shown as: F3E3

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

Scope: LCC180/190 table. LCX shorted-key display can be F2 E1. Do not apply the Maxwell warming-drawer meaning to LCC F3 E2.

Manufacturer reference
F5 E2Fault

Clean-cycle door switch disagreement

Also shown as: F5E2

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US LCC180/190 or LCX range control in W11174814; exact subfamily must match

Scope: LCC180/190 table. LCX shorted-key display can be F2 E1. Do not apply the Maxwell warming-drawer meaning to LCC F3 E2.

Manufacturer reference
F2 E1Fault

Key input short circuit

Also shown as: F2E1

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US LCX control only, W11174814

Scope: LCX variant specified in LCC/LCX chart; not a universal all-brand keypad code.

Manufacturer reference
F1Fault

Internal electronic control failure

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US LCC90/95 simplified control only, W11174814

Scope: Single F1 is not interchangeable with compound F1 E0 or another brand F1.

Manufacturer reference
Blank display in Energy SaveNormal mode

Clock display suppressed by energy-saving setting

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: Whirlpool electric range with Energy Save-capable control

Scope: Owner setting, not a fault code. Other blank-display causes remain possible.

Technical reference

Selected technical sources: Range service manual W11174814, June 2019 · Nothing is Working - Electric. The source family and manual revision must match the equipment. These records are not a complete code catalog for every model.

Professional service

When to Schedule Whirlpool Stove Repair

Schedule a Whirlpool range assessment when oven, gas ignition or burner or control problems persist after safe checks in the owner manual. Tell us the installed fuel or induction type, full model number and any exact display code.

  • An oven or surface zone repeatedly fails to heat or maintain temperature.
  • Normal cooking cycles stop unexpectedly or the controls do not respond.
  • The same error or warning returns after owner-manual checks.
  • Ignition repeatedly fails, burner clicking persists or the flame does not behave normally.
  • The oven door or protective lock mechanism does not operate normally.
  • A qualified technician is needed to test wiring, ignition, heating or control components.

Choosing Whirlpool Stove Repair? Read Reviews

Wondering who to call about your Whirlpool stove? From unresponsive controls to burners that will not light, repairs are easier to plan when you can check Google reviews about E-genius Appliance Repair from people in Charlotte.

5.0 200+ Google reviews READ ALL GOOGLE REVIEWS

Already our customer?

Already had a visit from our team for your Whirlpool stove? Please share an honest Google review. It helps us learn from each appointment and gives other homeowners information they can use.

Leave a Google review
Illustration of an E-genius Appliance Repair technician and a homeowner in a kitchen

Thank you for your support!

Stove repair in Charlotte, NC

Whirlpool Stove Repair

Whirlpool range not heating, oven temperature varying, or control display not responding? Share your symptoms and model to discuss stove repair in Charlotte.

  • Burner and oven heating issues
  • Whirlpool range information
Illustration of a freestanding kitchen stove for Whirlpool repair inquiries

Request a Call Back

Leave your number. We'll call you about your Whirlpool stove.

Your details are used to respond to your callback request.

Have questions? We have answers.

Frequently Asked Questions About Whirlpool Stove Repair

What does “F1 E0” mean on my Whirlpool stove?

For U.S. range with Maxwell/MRC control in W11174814; conditional brand coverage, not an all-SKU list, “F1 E0” indicates EEPROM communication fault. Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

What does “Blank display in Energy Save” indicate on my Whirlpool stove?

For Whirlpool electric range with Energy Save-capable control, “Blank display in Energy Save” indicates clock display suppressed by energy-saving setting. Use the exact owner guide to change the lock setting. Record any message and seek service if normal control operation does not return afterward.

Why will the oven door on my Whirlpool stove not unlock?

After self-cleaning, follow the model’s cooling and unlock instructions. Avoid pulling or forcing the latch. If the oven is cool and remains locked, report the complete message and whether the problem affects the main or secondary oven.

Why does my Whirlpool range fan continue after the oven is off?

On equipped models a cooling fan may continue to protect the electronics and cabinetry. Compare the behavior with the owner guide and allow the oven to cool. Report a fan error, abnormal noise, or continued operation after full cooling.

Other Whirlpool Appliances We Service

Your Whirlpool stove is not the only Whirlpool appliance our team can help with. Explore the additional Whirlpool service categories below, and contact us if you need assistance with another Whirlpool product.

(980) 443-5851 call me back