E-Genius Appliance Repair EPA Universal CertifiedEPA Certified $2M Insured Registered Charlotte, NC BusinessRegistered in Charlotte, NC

Thermador
Stove Repair

Experienced technicians serving your neighborhood.

Thermador Stove Repair in 3 Steps

Need Thermador stove repair in Charlotte, NC? Tell us about burners that will not ignite or unusual burner behavior and choose a service visit.

  1. Describe Your Stove Issue

    Report burners that will not ignite, unusual burner behavior, or an error message if shown. Include the Thermador stove or range model number.

  2. Schedule Stove Service

    Choose an available time for your Thermador stove repair appointment in Charlotte.

  3. Review Repair Options

    Our technician checks burner performance, heating, and controls on your Thermador stove or range, as applicable, and explains the repair estimate.

Book Thermador Stove Repair

Quick, convenient online scheduling · Opens in a new tab.

Thermador Stove Repair in Charlotte, NC

Need help with your Thermador stove? E-genius Appliance Repair diagnoses common problems such as burners that will not heat or ignite, uneven heating, or control problems in Charlotte, NC. Our technicians focus on the appliance fault, explain the recommended repair, and use repair procedures appropriate for the model.

Schedule online or call (980) 443-5851 to request Thermador stove repair.

Open & Available: (980) 443-5851 (980) 443-5851

Easy booking

We're only a few clicks or a phone call away.

In-home estimate

No risk. No pressure.

E-genius Appliance Repair Guarantee

Guaranteed parts and service.

Quality results

Expert technicians.

Thermador stove troubleshooting

Common Thermador Stove Problems

Tell us what happens when you use your Thermador stove or range. An oven-heating, gas-ignition or control issue can have different causes depending on the exact US model and its installed features.

Documented scope: US dual-fuel range with equipped induction module; surface topics: gas, induction, wifi. PRD364WIGU / PRD486WIGU / PRD48WISGU induction module plus generic oven update guide. No transfer of standalone Freedom cooktop codes. The symptoms below describe potential service scenarios, not measured defect rates or confirmed failed parts.

Power2 topics
  • Not working

    Possible checks: Record power status, display and which functions fail; distinguish no power from locked controls.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Clock resets

    Possible checks: Record outage history and supply stability; a clock reset alone does not prove controller failure.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Controls8 topics
  • Display blank

    Possible checks: Consider power interruption, clock-display setting or control fault; no single diagnosis inferred.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Control panel not responding

    Possible checks: Record lock setting and whether touch surface is dry and clear.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Keeps beeping

    Possible checks: Record displayed message and timing; separate timer or mode alert from repeated fault.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows error code

    Possible checks: Capture exact code, model and operating mode before any reset; use the matching control record.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows E + number (oven)

    Possible checks: Electronic oven fault; exact number required. Record the complete display and apply only the matching source.

    Model / feature scope: US Thermador range oven, matching electronic controls

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows E0612

    Possible checks: Control knobs disconnected from induction module. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F0

    Possible checks: Induction electronics fault. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F9

    Possible checks: Induction electronics fault. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Heating6 topics
  • Oven not heating

    Possible checks: Confirm selected mode and whether any surface zone works; diagnosis requires model-specific tests.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven heats slowly

    Possible checks: Compare observed temperature and elapsed time with the owner guide; supply, mode and heating checks are hypotheses.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven shuts off during cooking

    Possible checks: Record timing, code, power events and whether a safety time limit or delayed mode is active.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven will not turn off

    Possible checks: Treat uncontrolled heating as a service issue; stop using the appliance.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Treat uncontrolled heating as a service issue; stop using the appliance.

    Related repair options
  • Bake not working

    Possible checks: Distinguish bake-only failure from all-oven failure; identify gas or electric oven construction.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Broil not working

    Possible checks: Record whether other oven modes work and verify broil mode and door instructions.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Temperature11 topics
  • Oven temperature too low

    Possible checks: Record actual cooking result and selected setting; verify measurement and calibration procedure before blaming a part.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven temperature too high

    Possible checks: Stop cooking if heat is uncontrolled; document setting, actual temperature and displayed code.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven temperature uneven

    Possible checks: Consider rack placement, cookware, convection settings and temperature regulation.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F2

    Possible checks: Induction electronics overheat shutdown. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F1

    Possible checks: Cooking zone overheat shutdown. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F6

    Possible checks: Cooking zone overheat shutdown. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F4

    Possible checks: Hot cookware near controls causes shutdown. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows U2

    Possible checks: Cooking zone overheat shutdown. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows U3

    Possible checks: Cooking zone overheat shutdown. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F5 + power level alternating

    Possible checks: Hot pan near controls; overheat risk. Record the complete display and apply only the matching source.

    Model / feature scope: Cited Thermador range induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F5 + tone, zone off

    Possible checks: Hot cookware triggers protective shutoff. Record the complete display and apply only the matching source.

    Model / feature scope: Cited Thermador range induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Door2 topics
  • Oven door will not unlock

    Possible checks: Check temperature and clean-cycle history; do not force a hot locked door.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven door will not close

    Possible checks: Inspect visible obstruction and alignment after cooling; hinge or latch fault requires inspection.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Lighting2 topics
  • Oven light not working

    Possible checks: Check owner light settings and cool-appliance lamp procedure; bulb, switch and control are possible causes.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Oven light stays on

    Possible checks: Check door closure and selected light setting; switch or control fault is a hypothesis.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Cleaning2 topics
  • Self clean not starting

    Possible checks: Equipped self-clean models only; check cool-down, door closure and incompatible functions in the exact owner guide.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Self clean stops early

    Possible checks: Equipped models only; record code, door state and power events; do not repeatedly force a failing clean cycle.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Fan3 topics
  • Oven fan noisy

    Possible checks: Fan-equipped oven only; distinguish normal cooling sounds from new scraping or grinding.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Fan runs after oven off

    Possible checks: Fan-equipped oven only; post-cooking cooling can be normal. Record duration and heat context.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Convection not working

    Possible checks: Convection-equipped oven only; record mode and fan behavior; no motor failure assumed.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Odor2 topics
  • Burning smell

    Possible checks: Record food spill, new-appliance condition and smoke; stop use for electrical-burning symptoms.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Smoking

    Possible checks: Stop the cooking cycle; identify whether food/grease or the appliance is smoking. Do not continue a hazardous cycle.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Supply4 topics
  • Breaker trips

    Possible checks: Discontinue use and have a qualified electrician or service technician assess repeated tripping.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Discontinue use and have a qualified electrician or service technician assess repeated tripping.

    Related repair options
  • Sparks or arcing

    Possible checks: Stop using the appliance; no live electrical troubleshooting by the user.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Stop using the appliance; no live electrical troubleshooting by the user.

    Related repair options
  • Electric shock when touched

    Possible checks: Stop using the range and request qualified assessment of grounding, supply and appliance.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Stop using the range and request qualified assessment of grounding, supply and appliance.

    Related repair options
  • Shows U1

    Possible checks: Supply voltage outside limits. Record the complete display and apply only the matching source.

    Model / feature scope: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Modes2 topics
  • Controls locked

    Possible checks: Check the exact owner unlock procedure; control lock differs from a hot self-clean door lock.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows F8 + H / h

    Possible checks: Continuous-use safety time limit. Record the complete display and apply only the matching source.

    Model / feature scope: Cited Thermador range induction module

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Ignition4 topics
  • Gas burner not igniting

    Possible checks: Gas-surface models only; confirm correct burner-cap seating and whether clicking is present after cooling.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Burner keeps clicking

    Possible checks: Gas-surface models only; moisture, cap position or ignition system are possible explanations.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Burner does not click

    Possible checks: Gas-surface models only; record whether other burners spark; qualified diagnosis may be needed.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Delayed ignition

    Possible checks: Gas-surface models only; stop repeated attempts when gas accumulates or ignition is delayed; request service.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Gas-surface models only; stop repeated attempts when gas accumulates or ignition is delayed; request service.

    Related repair options
Surface7 topics
  • One gas burner not working

    Possible checks: Gas-surface models only; compare with other burners and record visible cap/port condition.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Gas flame uneven

    Possible checks: Gas-surface models only; inspect cooled cap seating and ports per owner guide.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Gas flame yellow or sooty

    Possible checks: Gas-surface models only; stop use if combustion is abnormal and request service; gas type and adjustment require qualified personnel.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Gas-surface models only; stop use if combustion is abnormal and request service; gas type and adjustment require qualified personnel.

    Related repair options
  • Gas flame too low

    Possible checks: Gas-surface models only; gas supply, ports or setting may need assessment.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Gas flame too high

    Possible checks: Gas-surface models only; do not adjust gas pressure or conversion components yourself.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Gas burner goes out

    Possible checks: Gas-surface models only; record simmer setting, drafts and whether relight occurs.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Burner cap not seated

    Possible checks: Gas-surface models only; let burner cool and follow owner seating instructions.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
Gas safety1 topics
  • Gas smell

    Possible checks: Treat gas odor as a possible leak. Leave the area; do not operate switches or flames. Contact the gas supplier or emergency service from outside.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Gas SURFACE burners only; excludes electric / induction zones.

    Next step: Treat gas odor as a possible leak. Leave the area; do not operate switches or flames. Contact the gas supplier or emergency service from outside.

    Related repair options
Induction10 topics
  • Induction burner not heating

    Possible checks: Equipped induction range only; verify compatible cookware and pan detection before suspecting a board.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Pan not detected

    Possible checks: Induction surface only; pan material, base size and placement are possible checks.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction shuts off

    Possible checks: Induction surface only; record pot placement, temperature protection and time-limit messages.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction buzzing

    Possible checks: Induction surface only; cookware and power level can produce normal sound; new abnormal noise needs inspection.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction overheats

    Possible checks: Induction surface only; record displayed protection code and cookware location; allow safe cooldown.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • One induction zone not working

    Possible checks: Induction surface only; compare cookware on another suitable zone and record the display.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • All induction zones not working

    Possible checks: Induction surface only; power, demo/lock state and common control fault are possibilities.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction power boost unavailable

    Possible checks: Equipped boost feature only; power sharing or operating limits may be normal.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction controls flashing

    Possible checks: Induction surface only; identify pan warning versus temperature or touch-control alert.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Induction glass cracked

    Possible checks: Glass induction surface only; discontinue use of a cracked surface and request service.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Induction SURFACE only; fitted zone / module required.

    Next step: Glass induction surface only; discontinue use of a cracked surface and request service.

    Related repair options
Connectivity4 topics
  • WiFi connection failed

    Possible checks: Connected models only; follow the applicable pairing and network instructions. Connection failure alone does not diagnose a heating defect.

    Model / feature scope: US dual-fuel range with equipped induction module. Researched families in Overview only. Apply each topic only where the model has the named feature. Wi-Fi-equipped control only.

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows E0211

    Possible checks: Home Connect update fault. Record the complete display and apply only the matching source.

    Model / feature scope: Thermador range with Home Connect update-capable oven

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows E1601

    Possible checks: Home Connect update fault. Record the complete display and apply only the matching source.

    Model / feature scope: Thermador range with Home Connect update-capable oven

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options
  • Shows E0510

    Possible checks: Home Connect update fault. Record the complete display and apply only the matching source.

    Model / feature scope: Thermador range with Home Connect update-capable oven

    Next step: Record full model, exact operating mode and visible symptom. Use owner-guide checks; arrange service if the issue persists.

    Related repair options

These are possible symptoms, not confirmed component failures. Gas, electric and induction features vary by model. Never bypass interlocks or attempt internal gas or high-voltage diagnostics.

Diagnosis before parts replacement

Thermador Stove Repairs and Parts Replacement

Different Thermador stove faults can produce similar symptoms. The full model number, cooking-fuel configuration, fault history and inspection findings guide which repair or replacement parts are appropriate.

Thermador Oven Heating and Temperature Repairs

We assess the oven mode, measured performance, temperature sensing and the heat source fitted to your Thermador range before recommending a bake element, igniter or other part. Uneven baking does not, by itself, identify a failed sensor.

Thermador Range Controls and Display Repairs

A blank display, repeated fault or unresponsive keypad may involve operating settings, the power supply or the electronic control. We confirm the specific Thermador model and documented control family before selecting a replacement component.

Thermador Gas Burner Ignition and Flame Service

On gas-equipped Thermador ranges, burner ignition, clicking or unstable flames require model-specific checks of accessible burner condition and the ignition system. Gas-line, valve and internal ignition work must be handled by a qualified professional.

Thermador Induction Surface and Pan-Detection Repairs

For induction-equipped Thermador ranges, cookware compatibility, zone detection and protective shutdowns are assessed before considering sensors or power electronics. Not every induction warning indicates a damaged module.

Thermador Oven Door, Hinge and Latch Service

Poor door closure or a locked oven requires review of hinge alignment, seal condition, cleaning status and the latch or switch system installed on the Thermador model. Do not force a hot locked oven door or defeat its safety switch.

Thermador Convection Fan and Oven Ventilation Service

Noise, intermittent air circulation and temperature variation can be related to fan operation, airflow or control behavior. We assess whether the exact Thermador range has convection and whether the fan cycle is normal.

Share the full Thermador model number, fuel type, affected burner or oven mode, and any exact error message. Assessment and service depend on model compatibility and local availability.

Request Thermador Stove Service
Model-specific reference

Thermador Stove Error Codes & Messages

These 17 reference entries are for particular US Thermador range controls and documented model families. Faults, warnings, normal operating modes and diagnostic results are labeled separately. The displayed code alone does not prove a component failure.

Check your exact model first: PRD364WIGU / PRD486WIGU / PRD48WISGU induction module plus generic oven update guide. No transfer of standalone Freedom cooktop codes. 1 entries have unresolved component-level meaning and require model-specific verification.

17 documented records across control families. Choose the exact model before using a code definition.

E + number (oven)Model check

Electronic oven fault; exact number required

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US Thermador range oven, matching electronic controls

Scope: Source does not provide a complete component fault table.

Technical reference
E0211Fault

Home Connect update fault

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: Thermador range with Home Connect update-capable oven

Scope: These are update errors in official range guidance. No temperature-sensor meaning is inferred.

Technical reference
E1601Fault

Home Connect update fault

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: Thermador range with Home Connect update-capable oven

Scope: These are update errors in official range guidance. No temperature-sensor meaning is inferred.

Technical reference
E0510Fault

Home Connect update fault

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: Thermador range with Home Connect update-capable oven

Scope: These are update errors in official range guidance. No temperature-sensor meaning is inferred.

Technical reference
F2Fault

Induction electronics overheat shutdown

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
F1Fault

Cooking zone overheat shutdown

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
F6Fault

Cooking zone overheat shutdown

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
E0612Fault

Control knobs disconnected from induction module

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
F0Fault

Induction electronics fault

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
F9Fault

Induction electronics fault

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
F4Fault

Hot cookware near controls causes shutdown

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
U1Fault

Supply voltage outside limits

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
U2Fault

Cooking zone overheat shutdown

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
U3Fault

Cooking zone overheat shutdown

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: US PRD364WIGU / PRD486WIGU / PRD48WISGU induction module

Scope: Range-module meanings from TH2, not standalone Freedom cooktop guidance. F4 differs from Bosch all-zone electronics overheating; U1 is voltage, not rewiring assumed.

Manufacturer reference
F5 + power level alternatingWarning

Hot pan near controls; overheat risk

Also shown as: F5

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: Cited Thermador range induction module

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Manufacturer reference
F5 + tone, zone offWarning

Hot cookware triggers protective shutoff

What to do: Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

Applies to: Cited Thermador range induction module

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Manufacturer reference
F8 + H / hWarning

Continuous-use safety time limit

Also shown as: F8

What to do: Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Applies to: Cited Thermador range induction module

Scope: Applies only to the cited model/control. Code does not by itself prove a failed part.

Manufacturer reference

Selected technical sources: Induction module use and care 8001275565_A · Range error codes. The source family and manual revision must match the equipment. These records are not a complete code catalog for every model.

Professional service

When to Schedule Thermador Stove Repair

Schedule a Thermador range assessment when oven, gas ignition or burner or control problems persist after safe checks in the owner manual. Tell us the installed fuel or induction type, full model number and any exact display code.

  • An oven or surface zone repeatedly fails to heat or maintain temperature.
  • Normal cooking cycles stop unexpectedly or the controls do not respond.
  • The same error or warning returns after owner-manual checks.
  • Ignition repeatedly fails, burner clicking persists or the flame does not behave normally.
  • The oven door or protective lock mechanism does not operate normally.
  • A qualified technician is needed to test wiring, ignition, heating or control components.

Before Booking Thermador Stove Repair

Need help with your Thermador stove? Problems such as burner ignition trouble and unresponsive controls are good reasons to research your repair provider. Read Google feedback from customers of E-genius Appliance Repair in Charlotte.

5.0 200+ Google reviews READ ALL GOOGLE REVIEWS

Already our customer?

Thanks for choosing us for your Thermador stove. If you've had a service appointment with our team, we'd appreciate an honest Google review about how it went.

Leave a Google review
Illustration of an E-genius Appliance Repair technician and a homeowner in a kitchen

Thank you for your support!

Stove repair in Charlotte, NC

Thermador Stove Repair

Thermador range gas ignition problem, uneven oven temperature, or control fault? Tell us whether the issue affects the cooktop or oven and share the model.

  • Burner ignition and oven heat
  • Discuss Thermador diagnostics
Illustration of a freestanding kitchen stove for Thermador repair inquiries

Request a Call Back

Leave your number. We'll call you about your Thermador stove.

Your details are used to respond to your callback request.

Have questions? We have answers.

Frequently Asked Questions About Thermador Stove Repair

What does “F2” mean on my Thermador stove?

For U.S. PRD364WIGU / PRD486WIGU / PRD48WISGU induction module, “F2” indicates induction electronics overheat shutdown. Stop the cooking cycle. For uncontrolled heat or supply faults, discontinue use and request qualified service.

What does “F0” mean on my Thermador stove?

For U.S. PRD364WIGU / PRD486WIGU / PRD48WISGU induction module, “F0” indicates induction electronics fault. Record full model, exact display and circumstances. Match the owner/service document; arrange service for a recurring fault.

Why does the clock on my Thermador range keep resetting?

Note whether the display goes blank and whether other appliances lose power at the same time. Mention recent outages or installation changes. Repeated resets without an identified interruption, or breaker trips, need qualified supply and appliance checks.

Why is the oven in my Thermador range slow to preheat?

Record the selected temperature, mode, cavity, and elapsed time and compare with the owner guide. Report whether Bake, Broil, and surface cooking still work. Changed preheat performance can involve heating, ignition on gas models, sensing, or supply.

Other Thermador Appliances We Service

Looking after several Thermador appliances at home? Along with stove service, our technicians work with the other Thermador appliance types listed below. Choose a category or contact us about a different Thermador model.

(980) 443-5851 call me back