Online booking opens in a new tab.
Need KitchenAid ice maker repair in Charlotte, NC? Tell us about no ice production or slow ice production and choose a service visit.
Report no ice production, slow ice production, or an error message if shown. Include the KitchenAid ice maker model number.
Choose an available time for your KitchenAid ice maker repair appointment in Charlotte.
Our technician checks ice production, water supply, and controls on your KitchenAid ice maker, as applicable, and explains the repair estimate.
Quick, convenient online scheduling · Opens in a new tab.
Need help with your KitchenAid ice maker? E-genius Appliance Repair diagnoses common problems such as no ice production, small or misshapen ice, leaks, or dispenser problems in Charlotte, NC. Our technicians focus on the appliance fault, explain the recommended repair, and use repair procedures appropriate for the model.
Schedule online or call (980) 443-5851 to request KitchenAid ice maker repair.
We're only a few clicks or a phone call away.
No risk. No pressure.
Guaranteed parts and service.
Expert technicians.
Tell us what happens when you operate your KitchenAid ice maker: low or no ice production, leaks, unusual ice quality, a stopping cycle, or a control warning. Include the full model, construction type, operating mode, and exact LED or beep sequence.
Researched US model and feature scope: Standalone clear ice; refrigerator compartment module (plumbed, clear, filter, fridge). W10761657B standalone LED diagnostics; W11509412A refrigerator module test codes in separate rows. Compatible SKUs not enumerated in tech sheets. Tests and ordinary-panel messages are distinguished. These are potential service-intake scenarios, not measured failure frequencies or confirmed defective parts.
Check selected ON/OFF / delay / cleaning state, actual bin level, water availability and model operating conditions.
Compare time since startup, use / demand, water availability, ambient conditions and accessible ventilation against the...
Locate visible leak origin without opening covers. Follow model guidance to stop water / production safely; drainage...
Stop use and follow the model water-shutoff instructions when safe. Record overflow location and whether production /...
Record storage time, actual bin temperature / melting behavior, ice type and demand. Some standalone bins permit normal...
Record supply-water taste, recent filter / plumbing work, storage contamination and cleaning history. Follow...
Record beep count, repetition interval, LEDs and full model. Do not borrow commercial alarm counts for a portable or...
Check owner-accessible power connection / controls safely and record other electrical symptoms. Internal electrical...
Possible checks: Check selected ON/OFF / delay / cleaning state, actual bin level, water availability and model operating conditions.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Compare time since startup, use / demand, water availability, ambient conditions and accessible ventilation against the exact model guide.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record full model, time since start, water temperature / room conditions and whether ice is actually produced.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record actual ice level, bin placement, pattern and mode; inspect only owner-accessible sensing areas.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record overfilled-bin behavior and level sensor / basket alignment; stop production using owner controls and request service if persistent.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Bin thermistor fault indication; open / short / connection condition must be distinguished. Record the exact model, controller and display context.
Model / feature scope: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listedNext step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Distinguish refill-tank model from plumbed model. Record exact ADD WATER / NO WATER indicator and actual water availability.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Locate visible leak origin without opening covers. Follow model guidance to stop water / production safely; drainage and supply are separate paths.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Stop use and follow the model water-shutoff instructions when safe. Record overflow location and whether production / filling continues.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Stop use and follow the model water-shutoff instructions when safe. Record overflow location and whether production / filling continues.
Related repair optionsPossible checks: Determine model drain design: gravity, pump or portable reservoir. Normal meltwater must be distinguished from water backing up.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Compare accessible drain routing / height with model installation instructions. Gravity and pumped drainage have different requirements.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. plumbed-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check the selected size / thickness setting if fitted, water availability and repeatability; settings vary by construction.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record storage time, actual bin temperature / melting behavior, ice type and demand. Some standalone bins permit normal melting.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record supply-water taste, recent filter / plumbing work, storage contamination and cleaning history. Follow owner-approved cleaning guidance.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record bin / water odors and cleaning history; discard affected ice and use the model-approved sanitation procedure.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Determine whether the bin is refrigerated or insulated only; record drainage, room conditions and production replenishment.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Possible mineral scale / water-quality or cleaning-residue issue. Follow the exact model cleaning and rinse guidance.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Stop using affected ice, record appearance and inspect only owner-accessible bin / water areas. Cause needs inspection; black particles are not a diagnosis.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Stop using affected ice. Arrange owner-approved cleaning / sanitizing and inspection if contamination persists.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record exact light pattern and whether a full documented cleaning cycle completed. Reminder reset alone does not perform cleaning.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record model, elapsed cycle time, water supply and last control action; follow matching owner instructions.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record completion message, rinse / water condition and selected operating mode; do not apply another brand reset sequence.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record every LED, color, steady / flashing cadence and mode. A blink alone can be a normal state, resource prompt or protective alarm.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record beep count, repetition interval, LEDs and full model. Do not borrow commercial alarm counts for a portable or refrigerator module.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check owner-accessible power connection / controls safely and record other electrical symptoms. Internal electrical work requires service.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check lock / showroom / mode options only where fitted; record displayed message and owner instructions.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Describe whether noise occurs at fill, compressor run, harvest, nugget extrusion or drainage; construction determines which parts exist.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record the operating stage, water presence and code. A hum does not identify a failed compressor, valve or motor.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record timing and operating stage; normal switching must be distinguished from repeated failed starting.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Compare demand / empty-bin recovery and room / water conditions with the model guide; note protection messages.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Record times, mode / bin state, water conditions and protective indicators. Normal bin-full cycling / delay may explain some pauses.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Stop use. Disconnect power only if it can be done safely and arrange qualified inspection; do not repeatedly restart.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Stop use. Disconnect power only if it can be done safely and arrange qualified inspection; do not repeatedly restart.
Related repair optionsPossible checks: Stop repeated resets and arrange qualified appliance / electrical inspection. Record circuit and timing without opening electrical covers.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed.Next step: Stop repeated resets and arrange qualified appliance / electrical inspection. Record circuit and timing without opening electrical covers.
Related repair optionsPossible checks: Check the accessible shutoff and visible tubing against the exact model guide; pressure / valve diagnostics require qualified assessment.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. plumbed-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Dry cycles detected; fill valve / frozen fill tube are possible causes. Record the exact model, controller and display context.
Model / feature scope: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Pump-equipped variant only. Record meltwater level, outlet restrictions, pump sound and behavior after production is off.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. plumbed-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Air-cooled model only: check owner-accessible ventilation / grille cleanliness and ambient limits; refrigerant work is for service.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. plumbed-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Clear-ice evaporator model only. Record slab thickness, harvest timing and scale; do not force ice or bypass sensors.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. clear-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check owner-described thickness setting if available, cleaning history and cycle behavior. Do not adjust internal probes without model-qualified service.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. clear-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Compare model thickness setting, water distribution and scale / cleaning history; a thin sheet has multiple possible causes.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. clear-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Standalone insulated-bin model only. Some melting is expected; distinguish proper meltwater drainage from a backed-up bin.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. clear-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Filter-equipped variant only. Record indicator and installation sequence; each model has its own timer / reset behavior.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. filter-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Check exact compatible filter and owner-described seating / flushing. Reduced production is not proof of a failed inlet valve.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. filter-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Only matching W11509412A refrigerator-compartment ice system researched here. Record ice-box temperature / fan symptoms and Test 56 context if provided by service.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. fridge-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Refrigerator-module construction only. A frozen fill tube is one possible dry-cycle cause; do not assume every E4 means this issue.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. fridge-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Matching refrigerator module only. Record mold / motor cycle and complete technician-provided test result; standalone hot-gas harvest meanings do not apply.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. fridge-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Matching refrigerator module only. Test 15 result 01 can mean bin full OR absent; check actual bin seating before assuming a sensor failure.
Model / feature scope: Standalone clear ice; refrigerator compartment module. Researched model / control limits in Overview. Apply any named feature only if installed. fridge-equipped model only.Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Harvest failure indication. Record the exact model, controller and display context.
Model / feature scope: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listedNext step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Bin thermistor circuit reported open. Record the exact model, controller and display context.
Model / feature scope: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 2Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Bin thermistor circuit reported shorted. Record the exact model, controller and display context.
Model / feature scope: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 2Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Evaporator thermistor circuit reported open. Record the exact model, controller and display context.
Model / feature scope: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 3Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Evaporator thermistor circuit reported shorted. Record the exact model, controller and display context.
Model / feature scope: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 3Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Unit thermistor circuit reported open. Record the exact model, controller and display context.
Model / feature scope: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 4Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Unit thermistor circuit reported shorted. Record the exact model, controller and display context.
Model / feature scope: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 4Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Ice compartment failed to reach the target temperature before timeout; cooling / fan issue possible. Record the exact model, controller and display context.
Model / feature scope: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Ice maker motor failed to find the home position within the permitted harvest attempts. Record the exact model, controller and display context.
Model / feature scope: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Harvest not completed after the 70-second diagnostic timeout. Record the exact model, controller and display context.
Model / feature scope: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 57Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Ice mold heater exceeded the permitted heating time without reaching its target. Record the exact model, controller and display context.
Model / feature scope: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Ice maker mold thermistor fault condition reported. Record the exact model, controller and display context.
Model / feature scope: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Ice maker thermistor circuit reported open. Record the exact model, controller and display context.
Model / feature scope: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 58Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsPossible checks: Ice maker thermistor circuit reported shorted. Record the exact model, controller and display context.
Model / feature scope: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 58Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.
Related repair optionsThese are possible customer-reported symptoms, not verified component failures or measured frequencies. Check the exact model instructions. Do not use equipment with active water leaks, damaged wiring or a suspected food-safety issue; never bypass electrical or refrigeration protections.
KitchenAid ice makers may use fundamentally different production methods, water supplies and controllers. We establish the full US model and actual symptoms before suggesting a service procedure or compatible replacement part.
For the researched KitchenAid ice maker family, we check the water connection or reservoir that is actually fitted, supply conditions and applicable water-level sensing. A warning alone does not identify a failed valve or sensor.
For your KitchenAid ice maker we compare startup time, ice yield and actual operating conditions with the exact model guide. Cooling-system or refrigeration component work is performed only by appropriately qualified technicians.
For documented KitchenAid clear-ice systems, harvesting, release and any cutter-grid or ice-thickness components are assessed against the exact model. Different machine styles can have different harvest mechanisms.
Persistent water beneath a KitchenAid ice maker may involve its installation, drain routing, reservoir or a fitted pump. Gravity drains and pumped drains require different tests; leaking electrical equipment must not be used.
Poor ice appearance, odor, scale or reduced yield can involve water quality, approved cleaning and fitted filtration. We follow the KitchenAid model manual, separating normal meltwater or storage behavior from persistent service faults.
KitchenAid refrigerator-compartment ice-maker diagnostics must not be confused with standalone clear-ice control messages. We match the complete model, service sheet, board generation and actual alert before discussing any electronic component.
Provide the full KitchenAid ice maker model and type, water-supply arrangement, ice-production symptoms and any complete code, flashing-light or beep sequence. Diagnosis and model-specific parts availability determine repair options.
Request KitchenAid Ice Maker ServiceThese 32 researched KitchenAid ice maker records include faults, protective stops, diagnostic history, maintenance prompts and normal operating indications. Check each against the exact model and controller; some models report LED patterns or beep counts instead of numeric codes.
Model and controller restrictions: W10761657B standalone LED diagnostics; W11509412A refrigerator module test codes in separate rows. Compatible SKUs not enumerated in tech sheets. Tests and ordinary-panel messages are distinguished. Ice Full, Cleaning, Add Water and other normal operating indications are not by themselves proof that a component has failed.
32 researched codes and status messages; 0 require model-specific verification. A code alone is not proof of a failed component.
What to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed
Scope: Meaning verified only in this source / control context; do not transfer between model families.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed
Scope: Meaning verified only in this source / control context; do not transfer between model families.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 2
Scope: Steady LED only inside the named service step; not an ordinary-panel status interpretation.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 2
Scope: The named step and LED are essential. The same flash count outside this service step has no assigned meaning here.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 2
Scope: The named step and LED are essential. The same flash count outside this service step has no assigned meaning here.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 3
Scope: Steady LED only inside the named service step; not an ordinary-panel status interpretation.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 3
Scope: The named step and LED are essential. The same flash count outside this service step has no assigned meaning here.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 3
Scope: The named step and LED are essential. The same flash count outside this service step has no assigned meaning here.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 4
Scope: Steady LED only inside the named service step; not an ordinary-panel status interpretation.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 4
Scope: The named step and LED are essential. The same flash count outside this service step has no assigned meaning here.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service diagnostic Step 4
Scope: The named step and LED are essential. The same flash count outside this service step has no assigned meaning here.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service Step 5
Scope: Owner-described state or setting. Descriptive LED / behavior labels are not asserted to be literal text on the display.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service Step 5
Scope: Owner-described state or setting. Descriptive LED / behavior labels are not asserted to be literal text on the display.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service Step 10
Scope: Configuration readout inside the ice-thickness step; not a thermistor or motor fault code.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service Step 10
Scope: Configuration readout inside the ice-thickness step; not a thermistor or motor fault code.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible SKUs not listed; service Step 10
Scope: Configuration readout inside the ice-thickness step; not a thermistor or motor fault code.
Manufacturer / technical referenceWhat to do: Follow the exact model cleaning / filter instructions and use approved supplies. A reminder alone does not establish a component fault.
Applies to: KitchenAid USA standalone ice maker with matching cleaning / filter-equipped control; SKU list not enumerated
Scope: Model-specific owner prompt; does not establish a failed component.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid USA standalone ice maker with matching cleaning / filter-equipped control; SKU list not enumerated
Scope: Source permits more than one cleaning context; blinking alone does not establish a failed component.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid USA standalone ice maker with matching cleaning / filter-equipped control; SKU list not enumerated
Scope: Owner-described state or setting. Descriptive LED / behavior labels are not asserted to be literal text on the display.
Manufacturer / technical referenceWhat to do: Follow the exact model cleaning / filter instructions and use approved supplies. A reminder alone does not establish a component fault.
Applies to: KitchenAid USA standalone ice maker with matching cleaning / filter-equipped control; SKU list not enumerated
Scope: Source specifies nine months / 2,000 gallons on matching controls; not a direct water-quality reading or a universal interval.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid USA standalone ice maker with matching cleaning / filter-equipped control; SKU list not enumerated
Scope: Applies to flashing after filter replacement in this support context; do not substitute GE UNC15 reminder meanings.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56
Scope: Service Test 56 only. Not a standalone-machine code and not asserted to appear as an ordinary customer-panel fault.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56
Scope: Service Test 56 only. Not a standalone-machine code and not asserted to appear as an ordinary customer-panel fault.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56
Scope: Service Test 56 only. Not a standalone-machine code and not asserted to appear as an ordinary customer-panel fault.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56
Scope: Service Test 56 only. Not a standalone-machine code and not asserted to appear as an ordinary customer-panel fault.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56
Scope: Service Test 56 only. Not a standalone-machine code and not asserted to appear as an ordinary customer-panel fault.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 56
Scope: Service Test 56 only. Not a standalone-machine code and not asserted to appear as an ordinary customer-panel fault.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 15
Scope: Leading zero preserved. Full and missing-bin conditions share this result; no assumption of a failed level sensor.
Manufacturer / technical referenceWhat to do: Check the selected mode and actual operating condition against the model owner guide. Record any symptom that persists after the normal condition ends.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 15
Scope: Leading zero preserved. This is a bin-state diagnostic result, not a generic 02 error.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 57
Scope: Digit 2 is the result; digit 1 is sequence state. Do not interpret this as ordinary display code 2.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 58
Scope: Digit 1 is heater state; digit 2 is the thermistor result. No service-test entry procedure is supplied for customers.
Manufacturer / technical referenceWhat to do: Record full model/suffix, control revision, complete code / LED cadence, mode and sequence. Use the matching owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
Applies to: KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, SKU list unspecified; Test 58
Scope: Digit 1 is heater state; digit 2 is the thermistor result. No service-test entry procedure is supplied for customers.
Manufacturer / technical referenceNo matching records. Check the model, display characters or beep/LED pattern and the matching owner guide.
Selected technical references: Standalone ice maker tech sheet W10761657B; Cleaning Light Blinking — Freestanding Ice Maker; Filter Light Blinking — Freestanding Ice Maker; Refrigerator tech sheet W11509412A, 12/2020. Only use definitions documented for matching US models and control generations.
Arrange a KitchenAid ice maker assessment when ice production repeatedly stops, water leaks, the machine cannot complete its documented ice cycle, or a model-specific alert returns after safe owner-manual checks. Share the exact model and control indication.
Need help with your KitchenAid ice maker? Problems such as temperature issues and low ice production are good reasons to research your repair provider. Read Google feedback from customers of E-genius Appliance Repair in Charlotte.
5.0 200+ Google reviews READ ALL GOOGLE REVIEWSThanks for choosing us for your KitchenAid ice maker. If you've had a service appointment with our team, we'd appreciate an honest Google review about how it went.
Leave a Google review
Thank you for your support!
Ice maker repair in Charlotte, NC
KitchenAid ice maker producing thin or thick slabs, failing to release ice, or displaying blinking controls? Describe the ice thickness and model so we can discuss a repair visit in Charlotte.
Your details are used to respond to your callback request.
Have questions? We have answers.
For KitchenAid standalone clear ice control matching W10761657B, 120 V; compatible models are not listed, “On/Off LED blinking” indicates bin thermistor fault indication; open / short / connection condition must be distinguished. Record full model number, control revision, complete code or flashing pattern, mode and sequence. Use the exact owner guide. Persistent faults require qualified service; the indication does not prove one part has failed.
For KitchenAid refrigerator compartment ice maker, tech sheet W11509412A; matching control, the compatible model list is not specified; Test 56, “E0” indicates service Test 56 reports no active ice maker errors. Check the exact model’s owner instructions for this operating state. If the appliance behaves differently from those instructions, report the setting, full model number, and accompanying symptoms.
Describe whether the sound occurs during filling, freezing, harvesting, or dispensing and record a short video if possible. Different ice-making mechanisms make different normal sounds. A new grinding noise, stalled mechanism, or noise with little ice production needs inspection.
Follow the exact model’s rinse, reassembly, and return-to-ice instructions. Check that required bins, covers, or reservoirs are correctly positioned. Record the current mode and light pattern rather than repeatedly restarting an incomplete cleaning sequence.
Need help with a different KitchenAid appliance? Beyond ice maker service, E-genius Appliance Repair supports the other KitchenAid categories below. Select the relevant appliance, or send us a request if your model falls outside this list.
ask for help
ask for help
ask for help
ask for help
ask for help
ask for help
ask for help
ask for help
Leave a request and our manager will give answers to all questions
call me backYour message has been successfully sent. We will contact you very soon!
