E-Genius Appliance Repair EPA Universal CertifiedEPA Certified $2M Insured Registered Charlotte, NC BusinessRegistered in Charlotte, NC

Bosch
Dishwasher Repair

Experienced technicians serving your neighborhood.

Bosch Dishwasher Repair in 3 Steps

Need Bosch dishwasher repair in Charlotte, NC? Tell us about not draining or dishes not getting clean and choose a service visit.

  1. Describe Your Dishwasher Issue

    Report not draining, dishes not getting clean, or an error message if shown. Include the Bosch dishwasher model number.

  2. Schedule Dishwasher Service

    Choose an available time for your Bosch dishwasher repair appointment in Charlotte.

  3. Review Repair Options

    Our technician checks drainage, leaks, and wash performance on your Bosch dishwasher, as applicable, and explains the repair estimate.

Book Bosch Dishwasher Repair

Quick, convenient online scheduling · Opens in a new tab.

Bosch Dishwasher Repair in Charlotte, NC

Need help with your Bosch dishwasher? E-genius Appliance Repair diagnoses common problems such as not draining, not filling, leaking, or poor cleaning performance in Charlotte, NC. Our technicians focus on the appliance fault, explain the recommended repair, and use repair procedures appropriate for the model.

Schedule online or call (980) 443-5851 to request Bosch dishwasher repair.

Open & Available: (980) 443-5851 (980) 443-5851

Easy booking

We're only a few clicks or a phone call away.

In-home estimate

No risk. No pressure.

E-genius Appliance Repair Guarantee

Guaranteed parts and service.

Quality results

Expert technicians.

Bosch dishwasher troubleshooting

Common Bosch Dishwasher Problems

Describe what happens with your Bosch dishwasher: standing water, leaks, poor cleaning or drying, a cycle that will not start, or a display message. Include the full model number, selected cycle and exact code or indicator pattern.

Researched US model and feature scope: Built-in, cited US owner family (wifi). SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N: five owner meanings verified. USA portal-only E09/E15 remain unresolved; meanings not copied from Thermador. These are potential service-intake scenarios, not measured failure frequencies or confirmed defective parts.

Drain3 topics
  • Not draining

    Possible checks: Check owner-accessible filters and visible hose routing; note sink/disposer condition and any air gap. Drain-pump failure is a hypothesis until diagnosed.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
  • Shows E:24

    Possible checks: Drain path restricted or pump cover loose. Record the exact model, controller and display context.

    Model / feature scope: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
  • Shows E:25

    Possible checks: Pump blockage or loose pump cover. Record the exact model, controller and display context.

    Model / feature scope: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Water inlet2 topics
  • Not filling with water

    Possible checks: Record water-supply valve status, visible hose bends, recent installation and full code. Valve, flow meter and pressure-sensor faults are hypotheses.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
  • Shows E:18

    Possible checks: Water supply restricted or turned off. Record the exact model, controller and display context.

    Model / feature scope: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Leak / safety1 topics
  • Leaking underneath

    Possible checks: Stop the wash and shut water supply if safe. Follow the model-specific protection response; keep electrical areas dry and arrange service. Do not bypass a float or leak sensor.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Stop the wash and shut water supply if safe. Follow the model-specific protection response; keep electrical areas dry and arrange service. Do not bypass a float or leak sensor.

    Related repair options
Door leak1 topics
  • Leaking from door

    Possible checks: Record loading, visible seal condition, suds and whether the appliance is level. Door alignment / seal replacement requires inspection.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Start / controls1 topics
  • Will not start

    Possible checks: Check exact start-door sequence, door closure, Delay and lock if fitted. Record lights and code rather than assuming a control-board failure.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Power1 topics
  • Will not turn on

    Possible checks: Record display state and household supply interruptions. Follow owner checks; repeated trips require qualified assessment.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Interrupted cycle1 topics
  • Stops mid cycle

    Possible checks: Record elapsed time, code, door condition and clock/display reset. Supply, latch, heating or pump faults are possible explanations.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Cycle duration1 topics
  • Runs too long

    Possible checks: Compare the selected cycle/options, soil and incoming-water conditions with owner timing; sensor/heating delays may extend a normal cycle.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Cleaning result1 topics
  • Not cleaning dishes

    Possible checks: Review loading, blocked spray paths, filter condition, cycle and proper detergent. Poor wash-pump performance is a service hypothesis.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Spray distribution2 topics
  • Top rack not cleaning

    Possible checks: Review loading and spray-arm obstruction; check upper-rack engagement where fitted. Diverter / circulation faults require diagnosis.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
  • Bottom rack not cleaning

    Possible checks: Inspect accessible spray-arm obstruction and loading. Do not infer a failed wash motor from a single poor result.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Drying result1 topics
  • Not drying dishes

    Possible checks: Check rinse aid, material, selected drying option and owner unload / wait guidance. Condensation, fan, heated and zeolite drying differ by model.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Heating1 topics
  • Not heating water

    Possible checks: Record selected program, supplied water and full message. Heater, relay and sensing failures are service hypotheses; internal electrical tests require qualification.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Sanitize result1 topics
  • Sanitized light not coming on

    Possible checks: Sanitize-equipped model only; confirm that option and whether temperature or interruption prevented completion. The light alone does not diagnose a heater.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Dispenser1 topics
  • Soap dispenser not opening

    Possible checks: Look for cookware blocking the accessible dispenser and follow the loading guide. Actuator/control faults require service diagnosis.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Detergent / wash1 topics
  • Detergent tablet not dissolving

    Possible checks: Compare proper detergent storage, dispenser dryness/loading, water conditions and spray-arm obstruction. A tablet left behind is not a code-to-part diagnosis.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Suds1 topics
  • Too much foam

    Possible checks: Use only dishwasher detergent. Record spilled rinse aid and product amount; follow the exact owner foam-removal guidance.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Water / detergent1 topics
  • Cloudy glasses

    Possible checks: Distinguish removable hard-water film from permanent etching; review detergent and rinse aid. Use softener settings only if installed.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Water / rinse aid1 topics
  • Spots on dishes

    Possible checks: Review rinse-aid level, water hardness and drying result; use owner-approved maintenance.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Odor / maintenance1 topics
  • Bad smell

    Possible checks: Review accessible filter, food debris and owner maintenance. Installation/backflow is a hypothesis if odor accompanies drainage problems.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Noise2 topics
  • Loud humming

    Possible checks: Record whether noise occurs during fill, circulation or drain. Pump blockage / motor problems need qualified diagnosis.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
  • Grinding noise

    Possible checks: With operation stopped and components cool, inspect owner-accessible filter area for debris. Pump disassembly is a service task.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Noise / loading1 topics
  • Knocking noise

    Possible checks: Check accessible spray-arm clearance and whether utensils contact an arm. Record whether the noise follows filling or washing.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Alert / controls2 topics
  • Keeps beeping

    Possible checks: Record complete code, flash groups, door state and timing. End-of-cycle reminders and door alerts are not always faults.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
  • Lights flashing

    Possible checks: Record exact lights, simultaneous/alternating pattern and flash count with pauses. A generic blinking light cannot be assigned a numeric fault.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Controls2 topics
  • Buttons not responding

    Possible checks: Check lock state, external moisture and owner start sequence. Keypad / control failure is only a hypothesis.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
  • Cycle will not cancel

    Possible checks: Use the exact owner cancel/drain sequence; it is not universal. Record whether leak protection is keeping the drain pump active.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Door1 topics
  • Door will not latch

    Possible checks: Check visible obstruction and rack position; do not force a damaged latch. Closure-switch failure requires service inspection.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Control lock1 topics
  • Controls locked

    Possible checks: If fitted, use the exact owner unlock procedure. Brand/model button combinations differ.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Leak protection / drain1 topics
  • Drain pump keeps running

    Possible checks: Record leak code, visible water and whether the door is open. Protection can force pumping; follow the actual model response before interrupting it.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Overflow / valve1 topics
  • Fills when turned off

    Possible checks: Shut water supply if safe and arrange service. Record whether the water is clean supply water or dirty backflow; do not assume a valve until inspected.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Shut water supply if safe and arrange service. Record whether the water is clean supply water or dirty backflow; do not assume a valve until inspected.

    Related repair options
Drain installation1 topics
  • Dirty water backs up

    Possible checks: Record sink/disposer use and visible drain routing / air gap. Check installation against the model instructions.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Electrical safety1 topics
  • Breaker trips

    Possible checks: Stop use after repeated trips; arrange qualified electrical and appliance assessment. Do not keep resetting or enlarge circuit protection.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Stop use after repeated trips; arrange qualified electrical and appliance assessment. Do not keep resetting or enlarge circuit protection.

    Related repair options
Safety1 topics
  • Burning smell

    Possible checks: Stop use for an electrical smell or smoke and isolate power only if safe. Record whether a plastic item contacted an exposed heater on an equipped model; arrange service as needed.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Stop use for an electrical smell or smoke and isolate power only if safe. Record whether a plastic item contacted an exposed heater on an equipped model; arrange service as needed.

    Related repair options
Rack / mechanical1 topics
  • Rack wheels broken

    Possible checks: Identify exact model and affected rack. Check accessible wheel / rail damage; avoid operating with damaged rack parts obstructing spray or door closure.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Connectivity1 topics
  • WiFi connection failed

    Possible checks: Connected model only; follow exact pairing guide and record AP / app status. A pairing issue alone is not a wash-pump fault.

    Model / feature scope: Built-in, cited US owner family. Researched model / control limits in Overview. Apply any named feature only if installed. wifi-equipped model only.

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Drain / filter1 topics
  • Shows E:22

    Possible checks: Dirty / blocked filters leave water in sump. Record the exact model, controller and display context.

    Model / feature scope: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Electrical supply1 topics
  • Shows E:27

    Possible checks: Supply voltage below permitted level. Record the exact model, controller and display context.

    Model / feature scope: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
Unresolved label2 topics
  • Shows E09

    Possible checks: Code listed; individual meaning unavailable in retrieved USA page. Record the exact model, controller and display context.

    Model / feature scope: Bosch USA portal; matching control, SKU list unspecified

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options
  • Shows E15

    Possible checks: Code listed; individual meaning unavailable in retrieved USA page. Record the exact model, controller and display context.

    Model / feature scope: Bosch USA portal; matching control, SKU list unspecified

    Next step: Record full model/suffix, construction, selected cycle, full display / blink pattern and sequence. Follow the owner checks; arrange qualified service if persistent.

    Related repair options

These descriptions represent possible service scenarios, not confirmed part failures. Follow the owner manual for your exact model. Stop using an actively leaking dishwasher and keep water away from electrical areas; never bypass flood or door protections.

Diagnosis before parts replacement

Bosch Dishwasher Repairs and Parts Replacement

Bosch dishwashers vary by rack design, controls, water systems and drying technologies. We first establish the exact model and affected cycle before recommending a replacement component.

Bosch Dishwasher Drainage, Filters and Pump Assessment

Persistent standing water in your Bosch dishwasher may relate to filtration, drain routing, a sink/disposer connection or the drainage system. Owner-accessible filter checks come first; pump diagnosis follows the exact model and documented symptoms.

Bosch Dishwasher Water Supply, Filling and Level-Sensing Checks

If the Bosch dishwasher does not fill or repeatedly pauses during filling, we review the water supply, installed inlet system and any fitted level or overflow sensor. One code does not confirm a failed inlet valve.

Bosch Dishwasher Wash Circulation, Spray Arms and Cleaning Performance

Poor cleaning, weak spray action or unusual wash noise can involve blocked owner-accessible spray paths, loading conditions or circulating-water problems. Model-specific circulation components are assessed only after proper diagnosis.

Bosch Dishwasher Heating, Drying and Temperature-System Diagnostics

We compare the selected wash program, rinse-aid settings and actual heating or drying behavior on your Bosch model before considering a heater, fan, thermostat or temperature sensor.

Bosch Dishwasher Door Seals, Latches and Leak-Protection Review

Leaks at the door or beneath a Bosch dishwasher require prompt attention. Door sealing, tub condition, installation and fitted float or flood-protection systems are checked using the correct model documentation.

Bosch Dishwasher Detergent Dispenser, Controls and Error-Code Diagnosis

Detergent release, door/control response and recurring error messages on a Bosch dishwasher are checked against the installed features and controller. A displayed fault alone does not prove which replacement part is needed.

Tell us the full Bosch dishwasher model, the selected program, where any water is collecting and the full displayed error or light sequence. Model compatibility, diagnosis and parts availability determine repair options.

Request Bosch Dishwasher Service
Model-specific reference

Bosch Dishwasher Error Codes & Messages

These 7 researched Bosch dishwasher entries cover fault codes, safety warnings, protective states, maintenance prompts and ordinary indicators where documented. Interpret each against the full model and controller generation.

Model and control limits: SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N: five owner meanings verified. USA portal-only E09/E15 remain unresolved; meanings not copied from Thermador. Control Lock, Delay Start, Add Rinse Aid and other ordinary prompts are not automatically equipment failures.

7 researched codes and status messages; 2 require model-specific verification. A code alone is not proof of a failed component.

E:18Fault

Water supply restricted or turned off.

What to do: Record full model/suffix, complete code or blink sequence, operating mode and timing. Follow the matching owner guide; persistent faults require qualified appliance service. A code is not proof that a specific part has failed.

Applies to: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

Scope: Exact owner-table context; digital glyphs visually checked against printed p.52.

Manufacturer / technical reference
E:22Fault

Dirty / blocked filters leave water in sump.

What to do: Record full model/suffix, complete code or blink sequence, operating mode and timing. Follow the matching owner guide; persistent faults require qualified appliance service. A code is not proof that a specific part has failed.

Applies to: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

Scope: Exact owner-table context; digital glyphs visually checked against printed p.52.

Manufacturer / technical reference
E:24Fault

Drain path restricted or pump cover loose.

What to do: Record full model/suffix, complete code or blink sequence, operating mode and timing. Follow the matching owner guide; persistent faults require qualified appliance service. A code is not proof that a specific part has failed.

Applies to: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

Scope: Exact owner-table context; digital glyphs visually checked against printed p.52.

Manufacturer / technical reference
E:25Fault

Pump blockage or loose pump cover.

What to do: Record full model/suffix, complete code or blink sequence, operating mode and timing. Follow the matching owner guide; persistent faults require qualified appliance service. A code is not proof that a specific part has failed.

Applies to: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

Scope: Exact owner-table context; digital glyphs visually checked against printed p.52.

Manufacturer / technical reference
E:27Supply status

Supply voltage below permitted level.

What to do: Record full model/suffix, complete code or blink sequence, operating mode and timing. Follow the matching owner guide; persistent faults require qualified appliance service. A code is not proof that a specific part has failed.

Applies to: Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C

Scope: This owner family specifies supply below 98V; electrical-installation assessment, not an assumed dishwasher component failure.

Manufacturer / technical reference
E09Model check

Meaning requires model-specific verification

Unverified reference context: Code listed; individual meaning unavailable in retrieved USA page.

What to do: Obtain the exact E-Nr owner / service guide before interpreting this code.

Applies to: Bosch USA portal; matching control, SKU list unspecified

Scope: Retrieved page exposes labels only. Neither an overseas Bosch definition nor Thermador meaning is substituted.

Manufacturer / technical reference
E15Model check

Meaning requires model-specific verification

Unverified reference context: Code listed; individual meaning unavailable in retrieved USA page.

What to do: Obtain the exact E-Nr owner / service guide before interpreting this code.

Applies to: Bosch USA portal; matching control, SKU list unspecified

Scope: Retrieved page exposes labels only. Neither an overseas Bosch definition nor Thermador meaning is substituted.

Manufacturer / technical reference

Selected technical references: Bosch en-us owner guide 9001410681_C; Bosch Dishwasher Error Codes. Only use definitions documented for matching US models and control generations.

Professional service

When to Schedule Bosch Dishwasher Repair

Arrange a Bosch dishwasher assessment when draining, filling, cleaning or drying remains unreliable after safe owner-manual checks, or when a persistent model-specific warning interrupts normal operation. Provide the complete model and cycle information.

  • Standing water remains after a completed drain cycle.
  • A normal wash repeatedly fails to fill or finish.
  • Cleaning or drying performance remains inconsistent across normal loads.
  • Water continues to leak or a flood-protection warning returns.
  • The door, latch or controls prevent a cycle from starting.
  • A recurring code or component issue requires qualified diagnosis.

Reviews Before Your Bosch Dishwasher Repair

If your Bosch dishwasher has drainage problems or unusual noises, take a moment to review the feedback Charlotte homeowners have shared about working with E-genius Appliance Repair on Google.

5.0 200+ Google reviews READ ALL GOOGLE REVIEWS

Already our customer?

If we've helped with your Bosch dishwasher, consider leaving a Google review about your experience. We value both praise and constructive suggestions because they help our service get better.

Leave a Google review
Illustration of an E-genius Appliance Repair technician and a homeowner in a kitchen

Thank you for your support!

Dishwasher repair in Charlotte, NC

Bosch Dishwasher Repair

Bosch dishwasher showing a fault code, leaving water in the tub, or not cleaning properly? Share the model and what happens during the cycle so we can discuss the next steps.

  • Error messages and draining issues
  • Cleaning and water-inlet problems
Illustration of a built-in dishwasher with open racks representing Bosch dishwasher repair service

Request a Call Back

Leave your number. We'll call you about your Bosch dishwasher.

Your details are used to respond to your callback request.

Have questions? We have answers.

Frequently Asked Questions About Bosch Dishwasher Repair

What does “E:18” mean on my Bosch dishwasher?

For Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C, “E:18” indicates water supply restricted or turned off. Record full model number, complete code or blink sequence, selected mode and when it occurs. Follow the exact owner guide; persistent faults require qualified appliance service. A code is not proof that a specific part has failed.

What does “E:22” mean on my Bosch dishwasher?

For Bosch SHE88PZ65N / SHX88PZ65N / SHV88PZ63N / SHEM78ZH5N; 9001410681_C, “E:22” indicates dirty / blocked filters leave water in sump. Record full model number, complete code or blink sequence, selected mode and when it occurs. Follow the exact owner guide; persistent faults require qualified appliance service. A code is not proof that a specific part has failed.

Why does my Bosch dishwasher not start after I press Start?

Check the model’s required Start-and-close sequence, door closure, delayed start, and control lock. Record the exact light pattern and whether the appliance fills or remains silent. A persistent start problem needs checks of the door and control system.

Why is detergent still in my Bosch dishwasher dispenser?

Check whether a dish blocks the dispenser and whether the detergent and cycle match the owner guide. Note whether the lid stays closed or opens but leaves detergent behind. These are different symptoms and help guide a dispenser, filling, or wash-performance assessment.

Other Bosch Appliances We Service

We handle more than Bosch dishwasher service. The links below cover other Bosch appliances our technicians service, while our team can also review requests for Bosch equipment that is not shown here.

(980) 443-5851 call me back